Want this question answered?
Not Even Pull Start?Mine would pull start but not electric. I found out that it was just a bad wire, so I put tape on it and it worked.
Behind the fly wheel is a plate with 3 marks on it, loosen the 2 screws and put on the center mark, tighten screws down....this should be done with piston in it highest position.
No. The RM250 stuck with smaller axles all the way to the end in 2008. The First Rmz 450's (2005) had larger axles front and rear. If you put RMZ450 forks and a Rmz450 swingarm on an RM250 it would work. These do fit although the rmz 450 swingarm is 25mm longer.
first you take the pull start f then get a drill and the socket that fits the bolt in the middle of the thing yiu see when taking the pull star the you put it on it then suzuki watch yir self ;)
no you can't because of the cases and frame
The kick stand is down or the kick stand switch is stuck.
type of oil does a suzuki intruder 650 take
Our Suzuki LT160 is a 1998 and it takes a quart and a half.
how much oil goes in a 2000 suzuki quadmaster 500
Put in 8qt's.
You need to put the key in the ignition, turn the ignition on, shift to neutral, turn on engine safety switch, wait for fuel pump to cycle, hold the clutch in, and press the start button. If the bike will not start, it may be your battery.Ê
yes you can put a suzuki gs200cc on a gn 125cc it the same