Yes you can, the heads should be the same, except that the VTEC head has the solenoid. i would recommend that you take it to a expert. The most difficult part is the connection on the solenoid.
DelSol_Racer
SOHC non-vtec
No, you cannot directly swap a 1.6 DOHC VTEC head onto a 1.5 SOHC non-VTEC engine without significant modifications. The two engine designs have different architectures, including differences in mounting points, intake and exhaust configurations, and timing mechanisms. Additionally, you would need to ensure compatibility with the engine management system and potentially modify the engine block to accommodate the DOHC head.
F22A1. SOHC NON VTECH. 2.2 liter I4 125-140 horsepower @ 145 ft/lbs torque
Stock motor that came in an 1990 Honda Civic Si is a D16A6. SOHC NON-VTEC motor. should be found on the block directly back from the radiator cap on below the cylinder head. The number is stamped on a flat area on the block.
The 1995 Dodge Neon 2.0 SOHC block and the 1996 Eagle Talon 2.0 DOHC non-turbo block are not the same. While both engines are part of the Chrysler family and share some components, they have different designs and specifications. The Talon’s DOHC design offers different performance characteristics compared to the Neon’s SOHC setup. Therefore, while some parts might be interchangeable, the blocks themselves are not identical.
non-vtec d16 engines have about 106 horsepower
no...they are different...it wont fit the block of a non turbo 4d56 engine...
can you swap a 2.2 head for a 2.2 vtec head?Will it match up with the Block?
will a h23a vtech work in a 92 prelude? what extra will be needed or changed besides a chipped p28 ecu ..? I have a 92' Honda prelude s.i. with a h23a1 non vtech and im going to swap, but i need answers before i buy this engine..
by putting a turbo engine into it.....non turbo engines were not meant to handle boost especially sohc engines...you can try to supercharge it though...there are many kits out there just for sohc stealth and 3000 gts
In short Yes, however if its a non-vtec b18 block you will have to do and ls-vtec conversion to it (kits available online).
d15b7 sohc non vtec