The short answer is, Yes. But here are the issues at hand:
If you require a 15 amp circuit you cannot go smaller.
Voltage of a fuse is determined by the voltage applied. You may not have 250v. You can use a fuse with a higher rating than the supply but not smaller.
Wire size is determined by overcurrent protection, which is your fuse, so if you use a larger amp fuse you must determine if the wire is large enough to handle it. Do not guess.
So the long answer is, Any 15 amp fuse with a voltage rating at or above the supplied voltage will work if properly installed.
Yes you can do that as long as it will fit in the fuseholder. It is acceptable to replace a lower Voltage Rated fuse with a higher but NEVER replace a higher with a lower. There are several things to consider when replacing a fuse: 1) The minimum voltage rating of the fuse is equal to or higher than the voltage of the circuit you are placing it in 2) The Amperage rating of the fuse does not exceed the capacity of the circuit you are trying to protect. Always replace a fuse with one that has the same amperage rating. 3) The interrupting rating of the fuse is sufficent for the capacity of the circuit supplying the fuse. If replacing a fuse always use one with an interrupting capacity equal to or greater than the fuse you are replacing.
The instructions to do glass fusing include melting glass at a high temperature to join and fuse glass together. One may need to use a glass kiln to successfully fuse glass.
No
Start off by opening the glove box their should be a legend saying what fuses do what find the number that is for the fuel gage, look under the steering wheel and you will see a fuse box pull out the bad fuse and replace it with another fuse make sure to use right ampage.
If an MCB trips you can simply close it and be done. If a fuse blows you need to replace the fuse /fuse wire, not so convenient.
Another 750 mA fuse. 750 mA is equal to .75 amps. The max I would put in is a 1 amp fuse and I would want to replace it soon with the proper one.
Yes you can do that as long as it will fit in the fuseholder. It is acceptable to replace a lower Voltage Rated fuse with a higher but NEVER replace a higher with a lower. There are several things to consider when replacing a fuse: 1) The minimum voltage rating of the fuse is equal to or higher than the voltage of the circuit you are placing it in 2) The Amperage rating of the fuse does not exceed the capacity of the circuit you are trying to protect. Always replace a fuse with one that has the same amperage rating. 3) The interrupting rating of the fuse is sufficent for the capacity of the circuit supplying the fuse. If replacing a fuse always use one with an interrupting capacity equal to or greater than the fuse you are replacing.
Remove the blown fuse. Replace it with a new fuse.
Automobile Glass fuse
The instructions to do glass fusing include melting glass at a high temperature to join and fuse glass together. One may need to use a glass kiln to successfully fuse glass.
You have to replace the fuse for it You have to replace the fuse for it
If you look on the backside of the climate control unit in the dash you will find a glass buss style fuse. It will be blown. Replace the fuse and your fan will stay on with your headlights.
The mirror heaters on a VW can stop working if there is a burnt out fuse. A technician can have a proper look at the fuse box and replace the fuse with another of equal rating.
You could replace it with a 3A fuse. You should never replace a fuse with one which is rated higher.
you replace the bad 1
Locate fuse. Remove old fuse with appropriate tool in necessary. Replace with new fuse of similar size and rating.
If the fuse is good, take the lighter out and check it in another car to see if it is good. If it is, then replace the recepticle. If it is bad, replace the lighter.