eBay has plenty. two screws holding lens in.
How do you replace the spark plugs on a Peugeot 307?
Pull the old one off and Push the new one on, That simple :)
peel bak the carpet in the he rear of the light assembly unit, there are two clips to be moved and the unit pops out. replace the bulb and reassemble
To replace the rear suspension bushes on a Peugeot 307, first, safely lift the vehicle and support it on jack stands. Remove the rear wheels and then detach the rear suspension components, including the trailing arms or subframe, as needed to access the bushes. Use a suitable tool, like a bush removal tool or a press, to remove the old bushes and install the new ones, ensuring they are properly aligned. Finally, reassemble the suspension components, replace the wheels, and lower the vehicle back to the ground.
To replace the rear light cluster unit on a Peugeot 307, first, open the rear hatch and remove the access panel in the trunk interior to expose the light cluster. Disconnect the electrical connector and unscrew the securing bolts of the light unit. Carefully pull the light cluster out and replace it with the new unit, reconnect the electrical connector, and secure it with the screws. Finally, test the lights to ensure everything is functioning properly before replacing the access panel.
To replace the rear wheel bearing on a Peugeot 307, first ensure the vehicle is securely lifted and supported on jack stands. Remove the rear wheel and brake components, then detach the hub assembly from the axle. Using a bearing puller, extract the old bearing from the hub and press in the new bearing, ensuring it's seated correctly. Finally, reassemble the hub, brake components, and wheel, and lower the vehicle.
To replace the rear seat latch on a Peugeot 307, first, remove the rear seat cushion by lifting it upward to release it from its clips. Next, locate the latch mechanism, which may require removing any surrounding trim or covers. Disconnect the old latch by unscrewing it and unplugging any wiring, then install the new latch by reversing the process. Finally, reattach the seat cushion and ensure everything is securely in place.
To replace the rear discs on a Peugeot 307, start by lifting the car and removing the rear wheels. Next, detach the brake caliper by unbolting it and hanging it securely to avoid straining the brake line. Remove the old brake disc by unscrewing any retaining screws and sliding it off the hub. Install the new disc, reattach the caliper, and ensure everything is tightened properly before replacing the wheel and lowering the car.
were about on the car do you fill up the additive on peugeot 307
hallo how need replace alternator belt and tensionier on peugeot 307 hdi manual?thanks
To replace the lights on a Peugeot 307, start by opening the hood and locating the rear of the headlight assembly. For bulb replacement, twist the bulb holder counterclockwise to remove it, then pull out the old bulb and insert the new one, ensuring it’s secure. For tail light replacements, access the rear lights by removing the access panel in the trunk, disconnect the wiring, and replace the bulb. Always check the vehicle manual for specific bulb types and detailed instructions.
Well, replacing a rear seat latch on a Peugeot 307 is just like painting a happy little tree. First, gently remove the old latch with care and attention. Then, simply install the new latch with a soft touch and a kind heart. Remember, there are no mistakes, just happy accidents.