NO. With the wrong oil, you will blow the seals. Your local dealer will have the right oil. Actually this answer is WRONG! You can use synthetic ATF oil as a substitute, and in the opinion of lots of ppl who have done this substitute, it IMPROVED their ride! Go for it, if you dont like the ride, drain the ATF and fill with whatever was in there before!
It takes 5.6 oz of fork oil in each fork.
qt fork oil and type oil for the front fork on each side
vl250 fork oil quantity
the front fork oil leval is to be set at 130mm from the top of the fork (air gap)..with the fork spring out ..and the fork fully collapsed ....
fork oil amount yamaha thunderace
r1 fork oil capacity
400cc 5wt fork oil
Both are correct, you can say substitute for or substitute with.
10w fork oil. 130-140 ml from top of fork, when fork is fully compressed without the spring inside the fork.
The bike has a front fork oil of 10w.And the manual prescribes of upto 251ml of oil for each fork.
For 2002 ex500 models others will be similar it takes 352ml of oilper fork. 15wt oil is what is manufacures speck for fork oil