I'm sure you could if you can find the parts you need and have the experience to do it.
With enough money anything is possible. It would take building a frame and making the Dart rear wheel drive to fit the V10.
take the oil cap off on the valve cover and pour in.
Take the back seat out and crawl into the trunk and open it that way.
regular unleaded.regular unleaded.
more than likely you will have to take the back glass out to be able to slide the headliner out.
87 octane regular gas.
take it off the engine and put it in a bucket of carb cleaner overnight and if this doesn't solve your problem you will have to get a rebuild kit and rebuild it.
yes but it may take a few mods. steering may be an issue
no such thing as a 226 v6- are you talking 225 slant 6- take bolt out of distibutwer at bottom and pull out
very simple task...first remove the rear seat, there you will see the motor, you should be able to take it from there.
take horn button off of the steering wheel and you will see a large nut holding the wheel on, take the nut off and then you will need a steering wheel puller to get the wheel off it's splines.
take tire off, pull brake shoes off, and on the backing plate in the back of it you will see 2 bolts that hold the wheel cylinder on, take the brake line out of the wheel cylinder and remove the 2 bolts and the wheel cylinder is off.