what would happen if you tinned the screen a cable
can't get a full screen since going to hd cable
The VGA cable that you would use to connect a laptop to a projector screen is called a PS2 projector cable.
Individual overall screen cable for intrinsically safe loops for analog and digital process instrumentation to suppress interference from radio frequency signal and electrical in-rust current such as starting of big motor, heaters etc., is expected. While the overall screen cable can be used as well but less reliable compare to individual, overall screen
Simplest way is to use a HDMI cable. I have a long cable reaching from my computer to my TV. I have to change the screen selection (Fn/F7) to select that screen.
I don't think so. The projection screen is basically a white tin plastic
To display LG TV pictures on your screen, you can connect your LG TV to your screen using an HDMI cable. Simply plug one end of the HDMI cable into the HDMI port on your LG TV and the other end into the HDMI port on your screen. Then, switch the input on your screen to the HDMI port that you connected the cable to. This should allow you to see the pictures from your LG TV on your screen.
Make sure your console is connected to your TV via a HDMI cable. Without that specific cable, Minecraft will not allow split screen.
The screen could go "fuzzy", have lines or distortions, or go to a blue or black screen. Also the picture may freeze -- these all could be signs of a defective cable box.
Console cable of pbx system, it is a cable that will display the digital signal into monitor or screen or It is data cable that shows user interface for system configuration.
err... check the screen cable between the PC and the monitor and make sure it's plugged in properly. with the thumb screws (if present) tightened!
It could be many things. For example it could mean a bad motherboard or a lose cable that connects the screen to the motherboard or the screen itself is damaged. You can narrow down your problem by connecting a desktop monitor cable to the VGA port now after you connect the monitor and you can see a picture it means that your motherboard is working and you may have a lose/damaged cable or a bad screen.
A Kyocera Strobe that has a blank screen can be fixed by replacing the screen and ribbon cable. Screens can be easily damaged from being dropped.