Nope. All GM vehicles made after 1996 comply with the OBDII standards and require a scan tool or code reader to retrieve codes
Remove the retaining ring from the top of your 1999 Chevy Cavalier ignition switch. Slide the ignition switch out and remove the wiring harness from the end of it.
You can remove the 1999 Cadillac Deville ignition switch by removing the retaining ring. The retaining ring will be at the top of the ignition switch. Pull the ignition switch out. Remove the wiring harness from the back of the switch. Reverse the process to install the new switch.
please give instructions on replacing the ignition switch on my 99 Malibu
Check ignition switch, common problem.
No, not if it is not defective. If the ignition switch is defective then that is all you need to replace.
Lick it.
To change the ignition switch on a 1999 Grand Prix, first disconnect the battery to ensure safety. Remove the steering column covers and locate the ignition switch, which is typically attached to the ignition lock cylinder. Unscrew the bolts holding the switch in place, disconnect the wiring harness, and replace it with the new ignition switch. Reassemble the steering column, reconnect the battery, and test the new ignition switch to ensure proper functionality.
day time running lights
does not have one only fords
It is in the PRNDL switch on top of the trans. It sends a signal to the ecm.
Turn the ignition key on for 10 minutes and it will reset.
change the Ignition Lock lock switch