Yes, there is a control knob on the gen-set that will have a label called field excitation or just field. Look at the volt meter and turn this control in a clockwise direction. The voltage should increase as you turn the control.
VA is electrical terminology for the combining of two words Volt Amps. This terminology is used when referring to transformers and generating equipment.
In the US the voltage is about 220 volts. This voltage is based upon the average voltage of the AC sine wave. It can peak as high as 240 volts or as low as 210 volts. So these different voltages are actually referring to an average 220 volt system.
Probably not, but I have yet to see a 150 volt appliance as this is a non-standard voltage. If you are referring to a 115 volt appliance then the answer is yes you can as 110/115/120 volts tend to be used interchangeably in practice and are close enough together to not affect operation of the appliance.
If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.
No, not a good idea. You have to use a 347 volt ballast.
VA is electrical terminology for the combining of two words Volt Amps. This terminology is used when referring to transformers and generating equipment.
Purchase, borrow, or have someone with a volt meter or multimeter check it for you. If you don't know what a volt meter or multi meter is, have an electrician check it for you.
One is assuming that the questioner is referring to Son Volt, an alternative country group. Their first album was released in 1995, and a new album was released in 2013.
In the US the voltage is about 220 volts. This voltage is based upon the average voltage of the AC sine wave. It can peak as high as 240 volts or as low as 210 volts. So these different voltages are actually referring to an average 220 volt system.
If you are referring to the main battery cable use 00 guage cable.
That depends entirely upon the size of the solar panel and how many cells it has. Panels can be small enough to fit on and power a pocket calculator, generating less than 1 volt, or they can be very large, such as those you might find on a residential rooftop for supplying 110 volt power for the home's needs. Or, they can be absolutely massive, generating megawatts of power, such as the ones used for commercial electricity generation and that compete with nuclear, fossil fuel, hydro, or wind generated electricity.
A volt is a volt is a volt.
A volt is a volt is a volt.
Probably not, but I have yet to see a 150 volt appliance as this is a non-standard voltage. If you are referring to a 115 volt appliance then the answer is yes you can as 110/115/120 volts tend to be used interchangeably in practice and are close enough together to not affect operation of the appliance.
Your question is not clear and very confusing. Please ask again and this time list make, model, and year of the mower your are referring to.
Current is rated in current, not amps ever. In referring to power usage, one may refer to volt-amps, which is a measure of power; but if you are referring to current, it is always in terms of current.
To my knowledge, 110 volt was about the voltage limit for a nuising dynamo collector effect called in electrical DC machinery as "fire arch" (please forgive the translation from my mother tongue Portuguese into English). Beyond 110 volt, a continuous spark all around the perimeter of the dynamo collector is usually observed, which led to the destruction of the collector itself and, therefore, to the generating machine. Nowadays, after the victory of clever Westinghouse against silly Edison, electrical power is not DC generated anymore, but the 110, 115, 117, 120, or whatever standard, is maintained by tradition.why not use 110 volt