The drier should have its operating voltage range marked on it. A heating element designed for 240 v would use 25% less electric power and produce 25% less heat when run on 208 v. So it would still dry clothes but it would take longer. If it has a motor to rotate it, whether the motor would operate correctly on 208 v is another matter.
yes 240volts is 240 volts
Yes, if the motor is rated 240 volts 3 phase.There is such a thing as 240 volt 3 phase power.However if you are asking if you can use 240 volts single phase on a three phase motor, then the answer is no.
Use a step up 240 to 600 volt transformer.
No. 240 Volts was the nominal standard in Australia with a tolerance of +/- 10%, So the voltage could be anywhere between 216 Volts and 264 Volts. The change to 230 volts is part of international harmonisation between countries that use 220 volt standards and 240 volt Standards. The new tolerance levels are +10% and - 6%.
You don't.
yes 240volts is 240 volts
240 volts maximum.
One has an element designed to work on 120 volts, the other has an element designed to work on 240 volts.
Yes, if the motor is rated 240 volts 3 phase.There is such a thing as 240 volt 3 phase power.However if you are asking if you can use 240 volts single phase on a three phase motor, then the answer is no.
Because 240 volts is dangerous
Slightly dimmly
France uses 220-240 volts for their electrical system.
Use a step up 240 to 600 volt transformer.
120/240 volts is the working voltage in North America.
120/240 volts is the working voltage in North America.
Answer for USA, Canada and countries running a 60 Hz supply service.To operate a 240 volt load in the home you use two adjacent breakers. This will give you a voltage of 240 volts where as one breaker to neutral will give you 120 volts.
No, unless the motor was wound for dual voltage operation, which it will state on the motor nameplate, a 110 volt motor run on 240 volts will be damaged.