0
You most certianly can. Voltage ratings on wires are 300V,600V and 1000V. These are the maximum voltages. 120 - 240 on 300V, 480 - 575 on 600V, 1000V wire is a special order used for specialized equipment.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is the cable size for a 3KW motor 350 meter run for cable 240v?
Assuming being fed by c32 breaker for start load minimum cable size SWA is 70mm which will go to 456 meters
Which wire in a 240V cable with black white and bare copper wires connects to which prong in a 3-prong 30-amp 120-240V dryer outlet?
Do not use this type of cable to feed a 120/240V dryer outlet. The outlet is ungrounded, and the third conductor is neutral not ground. Your ground wire must be sheathed by code. You cannot use the bare neutral conductor as ground. Diagram Did Not Come Through. You Have a 3 Prong Connector. The Prong On The Bottom By Its Self Connect The Bare Wire. That Is What Was # 3 Connect The Others To The Two Prongs Next To Each Other. Hope This Makes Some Sense (1) (2) (3) Connect White To (1), Connect Black To (2) Bare (3) Good Luck
Can you use 10ga wire for 220 volts?
There is a big misconception that there are two types of wire for different voltages. It is the insulation factor that governs amount of voltage that can be applied to a conductor. Most conductors have three standard voltage insulations, 300V,600V and 1000V. These are the maximum amount of voltages applied to each insulation. The type of insulation and size of a conductor governs the amount of amperage that can be legally applied to the conductor. To answer your question "yes" you can use 120V and 240V on 300V insulation. The "gauge" of the wire is the wire size measured in AWG. )American Wire Gauge. The code book lays out the amount of amps that are allowed on each size.
Can I use a 10A 250V power cord on a tv with input 100-240V?
yes
Originally a 240V line running from the 50A circuit to a box contaning in line fuses from this box came a 240V cable having 2 black wires and wire braid do I wire the outlet stove as a 3 or 4 prong?
3 prong the 2 black wires are your hot and the braided is your neutral.
Is a cat5e cable rated at 300V?
yes
Can I use 120v 10a 1250 w cable for projector 110-240v power in India?
You can use 120v 10a 125w cable projectors 110-240v power in India.
You want to fit a heater in a outhouse from a domestic 240v supply the cable has a resestance of 1.5 ohms and the heater has a resistance of 28.5 ohms what is the voltage drop in the cable?
31.5
How do you use a 120Vpower supply on 240V?
No, you cannot.
What is the cable size for a 3KW motor 350 meter run for cable 240v?
Assuming being fed by c32 breaker for start load minimum cable size SWA is 70mm which will go to 456 meters
Does Australia use ac or dc?
240v ac
What is the voltage drop of a 240V 40 aluminum cable at 600 feet?
not enough information use a voltage drop calculator >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Use these two calculaters....... http://www.csgnetwork.com/voltagedropcalc.html or http://www.elec-toolbox.com/calculators/voltdrop.htm Good luck. Brian...
Why there is two voltage rating on the same cable like 300V or 500V?
The first figure indicates the phase to neutral or ground voltage and the second is the phase to phase voltage. i.e. Vph-ph = 1.732Vph-n
How many meters can you run single phase 240v to another house?
Like all supply cables, it all depends on the CSA of the cable
How many volts work in Finland?
240v is the standard for household use.
Can you use one wire from the panel with 240v on it to wire a 240v water heater?
In North America it takes two "hot" wires to obtain 240 volts.
Can you use a 240V disconnect switch for a 120V AC?
Yes and you will have a spare terminal for future use
