Two thoughts here, one the fixture should be rated at the maximum wattage allowed for the socket the bulb screws into. A label should state "maximum wattage allowed". To do a calculation Watts = Amps x Volts. Amps = Watts/Volts. 5 x 60 watts = 300 watts. 300/120 = 2.5 amps. The electrical code only rates down to #14 wire which is rated at 15 amps. From here you have to make the decision.
180 watts
yes, it can be used - single phase voltage of 230v. 50HZ is important
A fixture is what the light bulb goes into.
lights can be wired any way round, there is no positive or negative
A wattage recommendation is applied to fixture after extensive testing. It is the bulbs approximation to the fixture that is the main concern. There is a certain amount of airflow around the bulb that is taken into consideration. A larger bulb is considerably hotter and this extra heat is what could damage the fixture. You should always go by the manufacturers recommendation.
If you used them simultaneously, probably around 1.46 million 60Watt bulbs.
Check your kids playing with the light switch
The kind of lighting fixture H11 bulbs are is a LED replacement daytime running light for automobiles. These halogen headlight bulbs help improve daytime visibility.
180 watts
This unit features and requires LED as a light source.
You can't. All you can do is install a new fixture that will allow higher wattage lamps.
As opposed to having 3 bulbs in it, yes.
yes, it can be used - single phase voltage of 230v. 50HZ is important
It can be quite simple to change the car interior light bulbs. A person has to Turn off the power of the car, Remove the lens, and the bulb, clean the fixture,and install the new bulb and lens.
If light bulbs are burning out quickly the light fixture could be getting too much electricity due to faulty wiring. They could also burn out due to a loose wire or screwing the light bulb in too tight.
It can be disconcerting having to look all over town to find replacement light bulbs for your favorite lamp or light fixture. Lights that are not used very often may be forgotten, and when it is time to replace the bulb, it may be difficult to find the right kind or the right size. Often, by the time you do find the bulbs you need, you realize, too late, that they are very expensive and that you can only get them from the lighting store. One of the ways you can save money on replacement light bulbs is to do a little research before you buy a light fixture. Look at the kind of bulbs the fixture uses and price them before buying the fixture. Also, look at availability. Are they easy to find or will you have to go all over town searching for them when it is time to replace the bulbs? Shopping online may save you a lot of time and money as well, simply because there is a much greater selection of light bulbs online than you will find at your local store. While you may be able to shop directly from the manufacturer's website, you will likely find that the light bulbs you need are much cheaper at other websites. When at all possible, purchase your replacement light bulbs before you need them. This way, you can shop around and compare prices and you won't be forced to buy expensive bulbs at the last minute. Not only will you want to compare the prices of the light bulbs you find online, but you will want to compare shipping prices as well. Since the cost of shipping can significantly add to the purchase price, it pays to compare these prices as well. By being proactive and shopping for your light bulbs before you need them, you will likely save a lot of money, and you won't have the aggravation of not being able to use your favorite light.
When electricity runs through the fillament in a light bulb, the electrons move so fast that they generate heat, which also creates light. Light bulbs actually create more heat than light.