0
Two thoughts here, one the fixture should be rated at the maximum wattage allowed for the socket the bulb screws into. A label should state "maximum wattage allowed". To do a calculation Watts = Amps x Volts. Amps = Watts/Volts. 5 x 60 watts = 300 watts. 300/120 = 2.5 amps. The electrical code only rates down to #14 wire which is rated at 15 amps. From here you have to make the decision.
What else can I help you with?
What is a light fixture that hangs from the ceiling?
A chandelier is a decorative light fixture that hangs from the ceiling and typically has multiple arms with light bulbs.
What is the wattage of a light fixture with 3 60 watt bulbs?
The total wattage of the light fixture with 3 60-watt bulbs is 180 watts (3 bulbs x 60 watts per bulb).
Why is indoor light fixture hot to the touch and light bulbu blows?
The light fixture may be hot to the touch because the bulb wattage is too high for the fixture, causing it to overheat. This can lead to the bulb blowing. Make sure to use bulbs with the correct wattage for the fixture to prevent overheating.
Do higher wattage bulbs give a brighter light?
Yes, in general, higher wattage bulbs produce more light than lower wattage bulbs. However, the brightness of the light also depends on other factors such as the type of bulb (incandescent, LED, etc.) and the design of the fixture.
What is the name of the lamp that hangs over with mutliple bulbs?
The lamp you are referring to is likely a "multi-bulb pendant light fixture." These fixtures typically hang from the ceiling and feature multiple light bulbs, providing ample illumination for the space.
What is the recommended wattage for 25 watt light bulbs in this fixture?
The recommended wattage for 25 watt light bulbs in this fixture is 25 watts.
How many light bulbs would you burn out by using 88000 kilowatts?
If you used them simultaneously, probably around 1.46 million 60Watt bulbs.
What is a light fixture that hangs from the ceiling?
A chandelier is a decorative light fixture that hangs from the ceiling and typically has multiple arms with light bulbs.
What is the wattage of a light fixture with 3 60 watt bulbs?
The total wattage of the light fixture with 3 60-watt bulbs is 180 watts (3 bulbs x 60 watts per bulb).
Can you use LED light bulbs in any fixture?
Yes, LED light bulbs can generally be used in any fixture that is compatible with the bulb's size and wattage. However, it is important to check the fixture's specifications to ensure compatibility and proper functioning.
Bought a new light fixture and light bulbs It has 3 bulbs Why do they only stay on a minute and go out?
Check your kids playing with the light switch
What kind of lighting fixture are H11 bulbs?
The kind of lighting fixture H11 bulbs are is a LED replacement daytime running light for automobiles. These halogen headlight bulbs help improve daytime visibility.
How can I rewire a fluorescent light fixture to accommodate LED bulbs?
To rewire a fluorescent light fixture for LED bulbs, you will need to remove the ballast and rewire the fixture to bypass it. This involves connecting the incoming power directly to the sockets where the LED bulbs will be installed. Make sure to follow proper safety precautions and consult a professional if needed.
What kind of bulbs will I have to purchase for the Improvements picture light fixture?
This unit features and requires LED as a light source.
How can you get more light from a fixture that will only allow 40 watt bulbs?
You can't. All you can do is install a new fixture that will allow higher wattage lamps.
Why are my light bulbs flickering and how can I fix this issue?
Flickering light bulbs can be caused by loose connections, faulty wiring, or a problem with the light fixture. To fix this issue, try tightening the bulb, checking the wiring, or replacing the fixture if needed. If the problem persists, consult a professional electrician for further assistance.
How can I install a 3 bulb light fixture in my living room?
To install a 3 bulb light fixture in your living room, first turn off the power to the existing light fixture. Remove the old fixture and disconnect the wires. Install a mounting bracket for the new fixture, then connect the wires from the fixture to the corresponding wires in the ceiling using wire nuts. Attach the fixture to the mounting bracket and secure it in place. Finally, install the light bulbs and turn the power back on to test the fixture.
