answersLogoWhite

0


Best Answer

If your question is can you use a #6 flexible SOOW cord and put a 30 amp plug on it, then yes. The breaker that feeds the receptacle that the cord will plug into can be no larger than a 30 amp breaker. What limits the cord capacity to 30 amps is the ratings of the plug on the end of the cord.


User Avatar

Wiki User

7y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can you use 6 gauge wire on A extension cord and put 30 amp plugs on it?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Natural Sciences

Does a long extension cord draw more power than a short extension cord?

No. However, a longer extension cord has higher resistance for a given wire gauge or size compared to a short extension cord and the voltage at the load device may drop so low that it doesn't work properly. This may also be accompanied by a noticeable rise in the temperature of the extension cord. As a rule, use the shortest extension cord that will get the job done. If the extension cord must be long, use one that has heavy gauge wire to minimize voltage drop at the load.


Can a microwave be plugged into an extension cord?

Yes, as long as the extension cord is rated for the load. Most microwave ovens use 1000W or more, some less. A standard two wire extension cord would be unsafe. There are, however, extension cords which have the proper gauge of wire and the necessary 3-prong outlets which a microwave would need to operate safely.


Is the ribbed wire on a extension cord the black?

no


How long can you run an electric extension cord?

It depends on the gauge of the wire, the length and the total current draw of the appliances. You said "heavy duty outdoor extension cord" so I'll assume 12 gauge wire. You can run a MAXIMUM of 20 amps for a MAXIMUM of 100 Ft on that wire. If the current draw goes up, so should the wire size. If the distance goes up, so should the wire size. 10 Ga wire - 30 amps for 100 Ft.


Can the cord on an electric heater be lengthened?

Yes, but with a heavier gauge wire <<>> If the cord on an electric heater needs to be lengthened as a perminant feature then the whole cord should be replaced with a new cord of the same type and wire size. What this prevents is aquiring bad splice connections at the point the connection is made. Bad splice connections will create hot spots in the cable. If the lengthening of the cord is just a temporary fix, just use an extension cord. The extension cord should be the same wire size as the heater cord. Keep the extension cord under 20 feet in length.

Related questions

Does a long extension cord draw more power than a short extension cord?

No. However, a longer extension cord has higher resistance for a given wire gauge or size compared to a short extension cord and the voltage at the load device may drop so low that it doesn't work properly. This may also be accompanied by a noticeable rise in the temperature of the extension cord. As a rule, use the shortest extension cord that will get the job done. If the extension cord must be long, use one that has heavy gauge wire to minimize voltage drop at the load.


Can you safely connect a 14 gauge 3 wire heater to a extension cord rated 16 gauge 3 wire?

16 Ga wire is smaller than 14 Ga. The answer is absolutely NO!


Can you connect a 6 outlet power bar to an extension cord?

There are several variables:First and most important, what will be the current draw? If the total number of amps exceeds the rating of either the power strip or the extension cord you're creating a fire hazard.Second, the wire gauge and length of the extension are important. You will loose voltage over distance and that is a function of the current draw, wire type and wire gauge. If you're trying to run 20 amps, don't use any less than a 12 gauge extension cord up to a maximum of 100 Ft. 15 amps, minimum 14 gauge.


Can a microwave be plugged into an extension cord?

Yes, as long as the extension cord is rated for the load. Most microwave ovens use 1000W or more, some less. A standard two wire extension cord would be unsafe. There are, however, extension cords which have the proper gauge of wire and the necessary 3-prong outlets which a microwave would need to operate safely.


Why is the voltage at the end of a long extension lead used with an electric drill less than the mains supply voltage?

Resistance in the length of wire that makes up the extension cord causes voltage to drop. But it needn't be a problem with the right extension cord. For an electric drill, up to a 25 foot cord of 16 gauge wire will cause a voltage drop so small as to be negligible. For 50 feet, switch to a 14 gauge cord. For heavier power tools (circular saw in particular) you should use a 14 gauge extension from the get-go.


Is the ribbed wire on a extension cord the black?

no


How long can you run an electric extension cord?

It depends on the gauge of the wire, the length and the total current draw of the appliances. You said "heavy duty outdoor extension cord" so I'll assume 12 gauge wire. You can run a MAXIMUM of 20 amps for a MAXIMUM of 100 Ft on that wire. If the current draw goes up, so should the wire size. If the distance goes up, so should the wire size. 10 Ga wire - 30 amps for 100 Ft.


Can the cord on an electric heater be lengthened?

Yes, but with a heavier gauge wire <<>> If the cord on an electric heater needs to be lengthened as a perminant feature then the whole cord should be replaced with a new cord of the same type and wire size. What this prevents is aquiring bad splice connections at the point the connection is made. Bad splice connections will create hot spots in the cable. If the lengthening of the cord is just a temporary fix, just use an extension cord. The extension cord should be the same wire size as the heater cord. Keep the extension cord under 20 feet in length.


What is the proper gauge of wire for an extension cord for a 700 watt microwave oven?

The most common wire size for an extension cord to use would be a #14 conductor. As extension cords are classed as flexible cords, the proper terminology would be a 3C/14. The cord consists of three #14 conductors, whose colouring is white, black and green covered by a plastic sheath.


How do you wire single phase 240V extension cord with five wires to female-male plugs having four wiring points?

No offense, but if you can't figure out how to make your own 4 wire extension cord out of a 5 wire cable you really shouldn't do it yourself. Go buy a book. Please. I will give you a hint though. Both ends of the cord are wired the same way.


Is ribbed wire black or white?

The ribbed wire on a lamp cord is the neutral wire. On an extension cord there is no rib but the neutral wire is white in colour.


How do you re-wire an extension cord green white black?

You can rewire your extension cord by replacing the existing wire with green, black and white wires. In most situations it is safer and cheaper to buy a new extention cord.