It can be used to glue skin and small wounds.
If by clip you mean the "shoe" that is the shiney square piece of metal that is in the mirror holder it slides out of the holder with prying by a screwdriver. Be careful not to hurt yourself.
You will need to get a strong epoxy resin to reglue the head. You will need to have removed all the old glue prior to putting the new stuff in.
Fabric such as headliner material commonly have a foam backing. The fabric comes loose from the backing. If this has happened then the fabric and backer will have to be removed and replaced, it can not be re-glued.
I have to glue and reglue the soles and heels of my Brockport pro walkers. Why? Should I return them. I have other Brockport shoes with no problem. Thomas A Shea twoshea1@optonline.net
I like a product called 'C&B Metabond.' However, you can use others as well. DO NOT attempt to reglue a loose bridge at home with superglue or other temporary glues.
Yes, there is a glue that can be used to re-glue a side car mirror. It is not an actual glue but more of an adhesive. That adhesive is construction silicone adhesive that is free of latex.
It slides in the direction of the smaller end. Be sure and glue the small end up, then slide the mirror back on.
Good luck trying to remove that mount button without breaking the glass. Better off purchasing another mounting button and glue it above or below the original one.
Your body replaces the outer layer of skin cells every few hours. I once glued electrodes to my the sides of my neck for a Frankenstein Halloween costume. I had to reglue them a couple times over the course of one (all nighter) Halloween party. Anyway, lips are probably the same.
Definitely not the best glue to use. Use wood glue. *Hide glue is tried and true. It is thought best by many for parts that may need to be repaired down the road. Titebond and Gorilla glue are also favoured, although Titebond has a longer open time.
If you are just removing the mirror from the glass, it is usally held on to a windshield button by a small set screw. If not, it is probably held to the button by wedge mounting to the button. The button itself cannot be removed from the glass without breaking the glass. If the button comes unattached, you can reglue the button with a special remount kit sold at auto stores.
Regretfully no there is no just cover or lens replacement. the whole healight assembly must be replaced. If somehow you do find a lens cover, then you will have to find a way to unglue the old cover without damaging the base and then reglue on the new cover with no air leaks so that water cannot get in and damge all of the electrical connections on the inside of the headlight assembly. Good luck to you