Want this question answered?
No, the amperage pin configurations are different between a 15 amp and a 30 amp plug.
Divide the watts by the voltage to get current (amps). 60W / 250V = about 1/4 Amp.
Use the correct fuse and nothing else.
The low frequencies of the bass destroy a guitar amp , so use a bass amp.
Yes, any bass amp works with any bass guitar
And If i get a jay turser bass guitar do i need a certain AMP?
Of course, the GB-30 is designed for a bass. In fact, you can play bass without an amp. The only purpose of an amp is to amplify the bass sound. Cheers, Jimmy
NO! The circuit wiring is protected by that 3.15 amp fuse. Put a 5 amp fuse in the circuit and the wiring may overheat and cause a fire. Never over-fuse any circuit even in an emergency.
You would have a code violation, only a 50 amp/250V plug would fit into a 50 amp/250V receptacle. You would not have proper overload protection, the load could (worst case) call for more amps than it is rated for and catch fire before the breaker tripped.
Check the battery pack. Even when the amp is turned off, if the jak lead is left in it depletes the battery. If that doesn't work, look into the lead itself, is it loose? Has the top part screwed off? Does it fit correctly in the ports on the amp and bass. Failing that, it could be the amp itself (has one of the cones torn or burst?) or a problem with the internal electrics or pickups on the bass guitar. If the problem isnt a faulty jak lead or flat battery, go to a music shop, DON'T attempt to rewire the electrics or screw with the pick ups etc yourself as it could be an easy fix for a professional and you could do alot of damage trying to repair it yourself.
Your speakers will blow out. A guitar amp is not meant to handle the low register of a bass. Even on a practice amp.
yes- there might be slight differences in the set up but a jack to jack lead will work with either instrument perfectly fine. There may be slight variations in tone between a guitar and bass lead but nothing that will dramatically effect it!