Probably not.
There are two types of adapters- regulated and non-regulated. An unregulated 9V adapter might have as much as 16 volts across its terminals when not connected, and deliver only 9V under load. Enough to fry something expecting 7.5 volts.
A regulated 9V adapter is better behaved and will probably deliver 9-10 volts. Still, this may well fry your 7.5 V device.
Get the right adapter.
Absolutely. The first rule: Source voltage should be equal to the device voltage. The second rule: Source current sould be higher than the cumulative of the device's current.
No
Yes it will
Yes, you can run a 4.3v device with a 5v power adapter as long as the amperage of the 4.3 volt device is under the amperage capacity of the 5 volt adapter.
input voltage is strictly according to applications. If use 12V dc adapter power 5V dc device, the 5v dc device would be damaged.
No... the source does not have the required capacity. The device (sink) would ask for more current which the source will not be able to provide. Do not use this source-sink pair.
By changing the polarity of the source
By changing the polarity of the source
erm i think its the beryl 3.5 edition version 2.3 adapter.---------------5v 1amp, I use a Zip drive adapter I got from ebayMike
no .never
yes, depends on equipment..
Yes the voltage is close enough to work. What you have to be cautious about is the milliamp output of the adapter. Make sure that the output of the adapter is higher than the device that plugs into it.