yes but fused wire is safer.
Yes.
No
Use the 4 wire if possible. You would only use a 3 wire for an old appliance.You shouldn't if possible. The 3 wire has no neutral wire as the 4 wire does. Som applications require the use of a 3 wire and some don't.
Yes, you can use copper wire instead of eureka wire to determine resistivity by measuring its resistance, length, and cross-sectional area. However, keep in mind that the resistivity values for copper will be different from eureka wire, so you will need to account for that difference in your calculations.
A: if you have many people will more then glad to use it.
i use 12 volt adapters. you can find them any auto store or electronic store. most plug in to the cig. lighter. I cut the plug and wire them (fused) to my primary accesory wire.
Yes, it is normal for lamp wire to become slightly warm during use due to the flow of electricity through the wire. However, if the wire becomes excessively hot or starts to emit a burning smell, it may indicate a problem and should be checked by a professional electrician.
You can use a wire instead of the starter to test the tubes .. I did it, it works !
That would depend on what you were drilling and what the project is.
Yes, you can use 10-3 wire instead of 10-2 wire for basic wiring. The extra conductor in the 10-3 wire is typically used for grounding or carrying an additional circuit, providing more flexibility for future electrical needs. Just make sure to properly connect and terminate the wires according to the electrical code requirements.
An individual would use a braided hose instead of a traditional wire covering if the wires being covered needed more protection. The braided hose is stronger than a wire covering.
a strong one its not nessecarily a good idea to use wire, it can cause injury to the dog, a normal wooden or chain link fence would be best, wire is flimsy and is flexible enough for a dog to get through.