0
What else can I help you with?
What is rigid channels in hydraulics?
A rigid channel in hydraulics refers to a component through which hydraulic fluid flows that is in no way flexible. A steel hydraulic fitting is an example.
What is a necklet?
A necklet is a fairly close-fitting and typically rigid ornament worn around the neck.
7 Where should you apply the flux to make a soldered joint for rigid copper tubing?
Clean the end of the pipe and the fitting where the two will connect with steel wool or sandpaper or the brush made to do it. Put a thin film on both surface's that will be touching. 1/2 to 3/4 of an inch on the end of the pipe. It help to have the flux past the area the fitting covers. Makes the solder flow easier.
Can you connect rigid copper to cast iron pipe?
If the copper is big enough, you can treat it as if it were cast and use packing and sealant. If the diameters are too different, you can use a rubber coupling to connect the two.
What example of an rigid link is?
A steel rod used to connect two components of a structure, such as in a truss bridge, is an example of a rigid link. This type of link does not deform under load and maintains its shape and length during operation, providing stability and strength to the structure.
What is rigid or semi-rigid?
Rigid is immovable, unbending. Semi-rigid can move in a limited way.
Should i use copper or compression fitting on rigid copper?
If you are joining rigid copper pipes together, it is recommended to use soldered copper fittings instead of compression fittings. Soldered fittings provide a more secure and leak-free connection compared to compression fittings, especially under high temperatures and pressure.
Are quadrilaterals rigid?
no they are not rigid.
Is ball and socket joint is rigid or mobile joint?
A ball and socket joint is a highly mobile joint. It allows for a wide range of movement in multiple directions due to the rounded end (ball) of one bone fitting into the cup-like socket of another bone. This type of joint is found, for example, in the hip and shoulder.
What are industrial electricians duties?
Industrial Electricians work in manufacturing plants, factories, power plants, ect. Rigid conduit is the usual raceway used, but also pvc coated rigid is common. also an industrial electrician will install and connect motors as well as motor control centers.
What is rigid polystyrene?
Rigid polystyrene is a hard plastic Rigid polystyrene is a hard plastic
What is meaning of rigid?
Firm; stiff; unyielding; not pliant; not flexible., Hence, not lax or indulgent; severe; inflexible; strict; as, a rigid father or master; rigid discipline; rigid criticism; a rigid sentence.
