0
Can you use a standered AV cable with yellow red and white to carry a component video signal through YPbPr?
Dcanaviri
Yes you can, but the cable isn't really right for video signals. Even the composite video signal that is normally carried by one of the three cables suffers over a long length. The best thing to do is to plug it in and try it. If vertical edges on the image appear slightly smeared, it may well be down to the cable and a new cable is called for. Have no worries - you won't damage anything by using the cable. The right cable to use, if you have a choice is 75 ohm coax. RG59 and URM70 cables will do the job although there are many others with higher spec (and price) that you can choose from. If you have to buy a pre-terminated cable, then choose the fattest cable you can find. It's not a scientific way of choosing the cable, but the diameter is normally an indicator of the quality of cable.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Can you split from standard video yellow to ypbpr?
A single cable carrying video will be carrying a composite video signal. This signal has brightness and two color signals encoded into a single signal. To generate a component signal (YPbPr)a video decoder is required. They are available from many sources from low cost domestic units to stunningly expensive broadcast models. The better the decoder, the better the resulting image. It is very important to understand that a composite signal has suffered losses because of the encoding. Decoding the signal to component does not restore that quality. Component interfaces can handle high definition as well as standard definition signals. Decoding a composite signal will result in a standard definition signal. Connecting it to a high definition input will not result in a high definition signal. Normally, the only reason to decode the signal to component is to interface to a device that only accepts component signals.
What does a traffic signal displaying a steady circular yellow light mean?
A traffic signal displaying a steady circular yellow light means that you should use caution when going through the intersection. You have the right away, but watch for other cars.
Why yellow colour is not used in signal?
because yellow is awesome
What shall do in yellow signal?
Yellow/amber light is a cautionary indicator that the signal is about to turn red. If you are too close to the light to safely stop at this point, you should proceed through. If you're able to stop in a safe manner, you should anticipate the light turning red, and stop.
What are those cords called ..The colored ones that you connect to your television for video and audio to work?
They can be called A/V cables and ones for HDTV are called component video cables. They all have RCA type plugs and the yellow is video and the red and white are audio on A/V cables. Component Video cable have two additional cables for HD Video signal besides the yellow one.
Can you a make s video to component adapter i need to convert an xbox yellow component cable just the yellow one to a s video. I have seen adapters but i want to make one myself solder 2 wires?
It is certainly possible to build a circuit to encode a component signal into an S-video signal and to convert S-video back to component. To do so will require significant electronics skills, a fairly complex circuit design and a complex build. Testing and set up will require a good qualityoscilloscope, signal generators and sufficient understanding of color encoding to interpret the test results.To buy the components will cost more than purchasing a commercial converter, will take far longer than buying one and is unlikely to operate as well as the commercial version.
What is the component tht have Rf value is 0.56?
yellow :)
What are the colors of white light and there degree of bend through prism?
the white light is separated into its component colors:) red, orange, yellow, green, blue and violet.
What color is the Signal wire for IAT Sensor on a 2004 3.5 I-5 Colorado?
The signal wire should be Tan. You should have a Yellow, Black, and Tan Wire. The Yellow being you MAF Sensor Signal. The Black being a Low reference voltage. Then your Tan your IAT sensor signal.
What is the another word for plasma?
The yellow colored liquid component of blood.
Is plasma in the blood?
Yes. It's the yellow component of a human blood.
When an ActiveX component need to be approved what color bar will appear?
yellow
