No but you can use a volt meter to read voltage.
What is the amount of energy per square meter on surface of earth coming from the sun?Read more: What_is_the_amount_of_energy_per_square_meter_on_surface_of_earth_coming_from_the_sun
Nope, when the meter's broke there ain't no-one can read it.
To read your electric meter accurately and efficiently, locate the meter on the outside of your home or in a utility room. Write down the numbers displayed on the meter from left to right, excluding any numbers in red or after a decimal point. Take the reading at the same time each month to track your energy usage consistently.
The number of revolutions the disk in a kWh meter needs to make to produce a read increase of one unit (1 kWh) is 1000 divided by the disk constant. The disk in a meter with a 7.2 constant (Kh = 7.2) will have to make 138 and 8/9 revolutions to make the right most dial in the meter increase its read by one unit.
meter exponent two...
A meter is simpler but it is not the standard system for America.
The employee read the gas meter.The item was 1 meter high.
To accurately read and monitor your house gas meter, locate the meter, record the numbers displayed, and track usage over time to monitor consumption.
The working principle of an electronic energy meter is a device that measures the electronic energy consumed (usually in KWh). It is often incased in glass and has a disk that rotates that measures the amount of power (product of current and voltage) the flows through the meter. The rotation is then integrated over time either by mechanical dials or an electronic digital counter to determine the total energy used.To simplify reading, many modern ones also contain a type of radio transponder that can be interrogated remotely from the meter reader's vehicle so he/she no longer has to find, read, and write down the value on every meter on his route.
Yes. It depends how you want to use the meter
what should the volt meter guage read in my '93 Jeep Wrangler 13.5 to 14.2?
Yes, a water meter will run backwards. Running your meter backwards is stealing and could result in your service being diconnected and or a fine. Modern meters that are read via radio signals are sofisticated electronic instruments and will report leaks and reverse flows when read. So if your meter is a radio read type you had better not mess with it.