we use mercury lamp instead of ordinary lamp because ordinary lamp has many wavelengths when mercury lamp has single wavelength so in constant deviation we use only mercury lamp.
One can use a standing lamp anywhere in their home by simply placing it in the desired space and switching it on. It may be a good idea to place a standing lamp close to the wall, which will prevent it from falling.
Ethos
The wattage of bulb one uses in a bedroom lamp depends on several factors. If it is a lamp used for back ground lighting or a night lamp, one would use a very low wattage bulb. If it is for a bedroom reading lamp, one would want a stronger wattage. The biggest factor on deciding what wattage to use is the wattage suggested by the lamp manufacturer. All lamps are marked with recommend bulb wattage.
Tu
A Panasonic TV lamp is for projection televisions that have burnt out their bulb already. If you need to replace your TV lamp then you will have to probably get someone to do it for you unless you are comfortable with your technology abilities.
we use mercury lamp instead of ordinary lamp because ordinary lamp has many wavelengths when mercury lamp has single wavelength so in constant deviation we use only mercury lamp.
the uses of lamp is to light us.....
probably to measure a lamp depending on if its a desk lamp or a stand up lamp, if you use a stand up lamp, i would suggest using either feet or inches
This is a lamp using alcohol as fuel.
No you cannot use a standard mr-16 12volt bulb as it will short right when you turn it on. They do sell them but you have to look up 120V mr-16 JCDR or JCDR-C.
A standard lamp will not use any electricity when it is off.
The alcohol lamp is used for heating.
Rear projection TVs are powered by a high-luminosity lamp. This lamp shines light through an LCD screen, creating an image on a rear-projection TV screen. Many TV lamps have a limited lifespan, requiring replacement after several thousand hours of use. When replacing a TV lamp, find the model that works for a certain TV brand. After purchase, locate the access panel on the back of the TV. Remove the old lamp, and clear the area of all dust. A great way to clear dust is with a vacuum cleaner or compressed air. Install the new lamp, and replace the TV panel.
No you can't. You can use a metal halide lamp of the exact wattage of the original mercury lamp. You cannot vary on wattage at all.
Open the hood. Above the headlights on each side you will find two L-shaped rods, held in place by plastic clips. Rotate the rods to release them from the clips. Lift them up and out of their holes. Now you should be able to remove the headlight assembly from out the front of the truck. Turn the lamp holder to remove it. Remove old lamp and replace. Goes back together just as easy. DO NOT TOUCH THE NEW LAMP WITH YOUR SKIN. Use a clean cloth to handle the new lamp.
The alcohol lamp is generally used during excursions.