Want this question answered?
Downwind from the fire.
The most common 'gas' in a fire extinguisher is carbon dioxide (CO2), but there are others. They include Halon 1211, Halon 1301, FM200, FE-36, Halotron I and a few more.
Pull the pin and rotate the charge handle forward.
Pull the pin and rotate the charge handle forward.
A Halogenated fire extinguisher, is a type of extinguisher that uses a chemical called Halon 1301. This is a liquid chemical that evaporates into a gas very rapidly. This gas is used to smother the fire and remove the Oxygen. Removing Oxygen from the fire is one method of extinguishing a fire. Without Oxygen, the self sustained chain reaction that which is fire, will cease to exist. Addendum: Halon 1211 is the most recognized halogenated agent used in portable fire extinguishers. 1211 comes out in liquid form so the user can see where it is being applied. Halon 1301 was mostly used in fixed systems for "flooding" entire rooms in a gaseous form. Otherwise the effects described above are correct. Halogenated agents have been around since c. 1900. As a fire fighting agent carbon tetrachloride was the first followed by chlorobromomethan (CB) and then halon 1211 and halon 1301. The newer "clean" agents are also halogenated chemicals, but supposedly do not cause harm to the environment.
halon
BCF fire extinguisher means a fire extinguisher containing Halon 1211;A Halon fire extinguisher would be used where delicate processes or electronics near the fire would be severely damaged by residue of dry chemical extinguishers. It is sometimes better to use a $10,000 fire extinguisher than destroy a $500,000 piece of equipment.BromochlorodiflouromethaneA person may use or store a BCF fire extinguisher if-was manufactured or imported before 1 June 1990; or(ii) was manufactured or imported after that date by an exempt person;and(b) it is used only for the purposes of extinguishing a fire (not being a firedeliberately lit for the purposes of firefighting training).(2) Subregulation (1) ceases to apply in relation to a BCF fire extinguisher on-(a) the day on which it is next liable to be subjected to a hydrostatic test; or(b) 31 December 1995,whichever is the earlier, and the person who owns or has possession of theextinguisher must, before that day, deliver the extinguisher to an office or station
Haylon 1211 150lb fire extinguisher
Upright
Hello all, As far as I know that we are using halon 1301 for our extinguisher. But if you have any damaged extinguisher then you can sell it on halon.us.
Pull, aim, squeeze and sweep. PASS.Pull the pin.Aim at the base of the fire.Squeeze the handle to release the halon.Sweep from side-to-side to extinguish the fire.
An electrical fire is a class B fire. If possible, the electricity causing the fire should be shut off. The most common fire extinguisher for this type of fire is an ABC dry chemical extinguisher. Class C can be used in a pinch, but a class A should NEVER be used if the electricity is still present in the fire.