No. Oil and water don't mix.
--
Oil and water can be mixed. Emulsify it. You would need to mix in the oil slowly while stirring with an electric mixer. You would need to use a large enough quantity of paint for the mixer to be submerged.
No. The linseed oil will not mix with a water-based alkyd.
Dont mix linseed oil and latex primer. Latex = Waterbased, Linseed Oil = Oil based Don't mix oil and water, unless you are making salad dressing.
Add the wood stain to the linseed oil until you have reached the desired color for your new door. Be sure to test the stain on the same kind of wood as the door so you will know the true color once you apply it to the door.
oil paints
why i linseed oil not used on oil stones
It depends on the stain. If it is a water base stain then no. If it is a oil or solvent base it should be fine.
Dont mix linseed oil and latex primer. Latex = Waterbased, Linseed Oil = Oil based Don't mix oil and water, unless you are making salad dressing.
Yes! Providing that the stain in question is "oil based"! If the stain is LATEX then no. Oil based products will mix, but oil and water won't! Water being the carrying agent of latex!
Purchase "natural" color in the oil stain line. This is clear oil without any colorant. Thin this down with mineral spirits about 50/50. The idea is to flood this on the surface first and wipe it off. Then apply your colored wood stain. Since the wood is somewhat filled up with the natural oil, the penetration of the colored stain will be more even. An even less expensive way to make this is to substitute "boiled linseed oil" for the natural stain in the mix. Here I would go with a mix of at least 2 parts mineral spirits to 1 part linseed oil, since the linseed oil is heavier to start with. The trade-off using this "conditioner" is that you are not going to get as strong a color overall on the piece.
I buy boiled linseed oil and mix with paint thinner [3 partd thinner to 1 part linseed oil] If you want a color add 1 qt of oil based wood stain to 4 gallons mixed CAUTION treat wet rags carefully as they can spontaneously combust
Add the wood stain to the linseed oil until you have reached the desired color for your new door. Be sure to test the stain on the same kind of wood as the door so you will know the true color once you apply it to the door.
Usually a mix of Tung Oil and Boiled Linseed Oil with mineral spirits to thin.
oil paints
A. oil paints
An opaque mixture of pigments dissolved in linseed oil and applied to a panel is called a stain. Stains come in a variety of colors and are used to help protect wood from rotting.
why i linseed oil not used on oil stones
It depends on the stain. If it is a water base stain then no. If it is a oil or solvent base it should be fine.
Linseed oil is a traditional PRESERVATIVE and has been used for centuries for concrete, masonry, wood and metal. You would mix it 1 parts linseed to 2 parts turpentine (not mineral spirits), but the mixture would vary. You want to used boiled linseed oil, not raw linseed oil (check the label). Note this is not a SEALANT but a preservative- if you are doing your garage or basement floor, try something else! Also be careful- the tools and rags you use can spontaneously combust (i.e.: burst into flame, no kidding!) when being used with linseed oil. Check the Wikipedia page for details under "Linseed Oil"