answersLogoWhite

0


Best Answer

Moulded breakers or shunt trip breakers - selection is defined by the current rating requirement.

User Avatar

Wiki User

6y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can you use molded breakers instead shunt trip breakers for an Ansul fire suppression system?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

Can you reverse feed a residential 2-pole circuit breaker?

Yes. This is the way small residential transfer switches connect the generator to the system. The breakers are bidirectional.


What is a TVSS in Electrical Engineering?

A TVSS is a transient Voltage Suppression System. It activates in times of a high voltage condition. The high voltage condition could be caused by many things such as a lightning strike or a transformer failure.


How do you size circuit breakers in three phase system?

each phase is wired to its own breaker and all three breakers are tied together so they trip simultaneously (i.e., if one goes, they all go). If there is a neutral (as in a wye configuration), it connects to the neutral bar of the system, which may or may not also be bonded to ground (depending upon how the three-phase is derived and whether the panel is in the same building, among other things).


How do you find out the reason why the motor trips the Ground Fault Circuit Interrupter when starting?

GFI Breakers are designed to an entire system of Receptacle's. they work by tripping any time there is an over load in the system , shorts and quick changes in current. make sure there isn't anything on other receptacle's. still occurs, put the load on it's own breaker..


Why negative control is adopted in DC system And why DC circuit breakers are kept at the negative side?

The answer is: They are not. Whosoever told you that is off his meds. Alternatively, in some special applications there may be a reason for it. Many DC systems use a common ground where the loads are encased in the ground (like starter motors). Thus all breakers are positive, but some don't. If the loads don't care about polarity and the positive and ground are not common (like with a metal chassis), positive and negative is irrelevant.

Related questions

What is is bliss acronym?

Boundary Layer Infrared Suppression System


Does concession trailers have to have an ansul system?

yes, if it has a hood it has to have a fire suppression system.


What is immune system suppression?

AIDs, I'm pretty sure.


How do you install a Ansul schematics?

Need directions to install a Ansul suppression system.


What is the Colour code system for screw in fuses and breakers?

The Answers community requested more information for this question. Please edit your question to include more context.


What are the main protective devices in a power system?

Circuit Breakers or fuses.


Taking depressants with alcohol can result in what?

Suppression of the central nervous system and possibly death.


How enhancement and suppression of immune system can be laid up using medicinal plant?

lund


What is the most appropriate type of fire suppression system to install in a data center?

halon


Do you need fire extinguishers if there is a suppression system?

Yes, portable fire extinguishers can be used on very small fires in the incipient stage, well before they trigger any automatic suppression system. Fire codes require fire extinguishers in all commercial occupancies and all multi-dwelling structures, whether or not there are other suppression systems.


Is there any alternative for fuse in house wiring system?

Yes. Circuit Breakers.


What is the most appropriate type of fire suppression system to install in a data center room?

halon