No
The best way to remove motor oil from leather is to use leather cleaner. You can also try to use Oxy-clean.
The Marksman doesn't require much cleaning. I suggest you purchase Crosman pellgun oil and put some on a cloth and wipe down the pistol. Open the breech (Barrel) put a drop of oil on a q-tip and run it through the barrel. Do this until the Q-tip is clean. DO NOT use any firearms cleaning agents on the pistol or it will ruin the seals in the gun.
lube it and clean it, chances are that's what it needs, use paintball specific oil, no motor oil or wd-40
no it can't. But cat-litter can, use that. but sorry concrete dust wont work.
If a motor is burning oil it means the rings and seals on the pistons are worn. Are you sure it's burning oil and not just leaking oil? Check your motor for leaking oil clean the engine. Cover your alternator with plastic and use degreaser to clean it. Once it's clean run the motor and look for leaking oil from the valve covers, from the head(s) and head gasket(s), from the oil pan and drain plug and from an oil cooler and oil cooler hose ( if your vehicle has one). If your vehicle is burning oil it will show up at your exhaust pipe as oozing black sticky stuff. Hopefully it isn't burning oil because if it is you need to have your motor rebuilt.
You can use 10W-30 weight motor oil in your Mitsubishi. A heavier motor oil can be used in extreme climates.
To clean a Glock pistol, first ensure it is unloaded by removing the magazine and checking the chamber. Use a cleaning rod and brush to scrub the barrel, followed by a patch to remove residue. Wipe down the frame and slide with a cloth and apply a light coat of gun oil to moving parts. Finally, reassemble the pistol and function check to ensure it operates smoothly.
The 1999 Oldsmobile can use any SAE certified motor oil. The manufacturer recommends 10W-30 weight motor oil. Extreme climates can use a heavier motor oil.
The Crank Case is dirty. Use a good Crank Case cleaner to solve problem like Motor Medic Motor Flush. Warm engine 5 minutes and let clean out for 5 to 7 minutes. Then drain and use fresh oil.
Never use Motor oil on a BB gun. It will eventually ruin the seals and O-Rings.
2 cycle motor oil
It depends the motor.