0
yes, with additional circuitry. an opamp wired as a differentiator followed by an opamp wired as a comparator can provide short timing periods. an opamp wired as an integrator followed by an opamp wired as a comparator, plus some other circuits left as an exercise to the reader can provide long timing periods.
Wiki User
∙ 11y ago
Wiki User
∙ 9y agoA capacitor and a resistor can control a timing circuit. Multiplying the capacitance (Farads) by the resistance (Ohms) gives a quantity called the Time Constant in seconds.
So a 1 uF capacitor and a 1k resistor create a time constant of 1E-6 x 1E3 which is 1 millisecond.
A common use of a timing circuit is a monostable multivibrator, which produces a pulse with a well defined length. The length of the pulse depends on the time-constant and the voltages used in the circuit.
Add your answer:
Earn +20 pts
What is the use of offset null in an opamp?
A: Any offset whether is voltage or current is an output error to contend with.
Why voltage gain is high in op amp?
A practical opamp is designed to approach the characteristics of the ideal opamp as closely as possible. The open loop voltage gain of an ideal opamp is infinite, so while this is actually impossible to achieve practical opamps are built with as high an open loop voltage gain as possible.
How do you calculate execution time of an exe file?
Use a high-resolution timer such as the HPET (high performance event timer).
Which of following OP amp is used to strengthen the week signal?
741 opamp
What is the applications opamp buffer circuit?
An opamp buffer circuit is one where the input signal is connected to the plus input, and the output is connected to the minus input. Within the performance limitations of the opamp, the output will track the input. The advantage of the buffer circuit is that is presents very little load impedance to the input signal, while providing a low impedance from the output to drive whatever circuitry is connected there.
What is timer advantage?
time interval most use the timer
What is the use of offset null in an opamp?
A: Any offset whether is voltage or current is an output error to contend with.
Similarity between opamp and comparator?
A comparator is simply an opamp with a certain configuation of external circuitry ( a few components) that make it function as a comparator.
Why is a timer is used in an electrical circuit?
Timer relays are used in control circuitry. There are two main types, an (off delay) and an (on delay). If you want one device to turn off before the timer controlled device then you would use an off delay timer. If you want one device to turn on before the timer controlled device then you would use an on delay timer. When the timer is energized this starts the timer circuit in the relay to time out.
How do you make a 30 second timer?
You can use the 555 timer to make a one minute solid state timer.
What is the use of timer in electronics?
A timer can be used to controlthe sequence of an event or process.Himanshu Joshih.joshi002@gmail.com
What is the use of timers?
The recording timer is used to measure time. Races for example will use a recording timer to track certain records.
What IRQ does the system timer use?
0
Is IC741 a hybrid ic?
no, the 741 opamp is a monolithic IC.
IC 741 is an?
It is an opamp chip consisting of 8 pins
Why voltage gain is high in op amp?
A practical opamp is designed to approach the characteristics of the ideal opamp as closely as possible. The open loop voltage gain of an ideal opamp is infinite, so while this is actually impossible to achieve practical opamps are built with as high an open loop voltage gain as possible.
How long does it take for a timer ball to max out?
A timer ball cant max out, however once you use a timer ball the number of turns that have took place will be reset
