the transmission cooler lines don't match. diameter of radiator hoses are not the same. it probably won't mount up to the vans radiator brackets.
how do i install a radiator on a 1993 isuzu npr?
How do you install a radiator in a 1998 ford contour?"
The process may vary slightly depending on the vehicle that the 2.7 Chrysler is in . Drain the radiator. Remove the top radiator hose. Remove the serpentine belt. Unbolt the water pump. Replace the pump, using new gaskets. Install the belt, hose, and new coolant.
The steps that are necessary to install a towel radiator vary depending on the model of the radiator and the space that you're looking to install it in. For the most accurate instructions, consult the instruction manual for your particular radiator, or contact the radiator's manufacturer.
install a new radiator
A Chrysler LHS does not have a mass airflow sensor.
See previous question of same nature.
Drain the radiator of fluid, take the shroud off if it has one, take top and lower radiator hoses off the radiator, if automatic transmission you need to take the 2 lines that go into the bottom of the radiator off, unbolt the 4 bolts that hold the radiator in to the radiator support and pull the radiator out, to install new radiator just reverse the process.
How do you take off a radiator for a 98 Buick Regal
I have a 93 3.8 and it's not a bad project but the lower oil cooler line is a b..tch, disconnect the lower line from the two brackets under the radiator and install lower line before you install the radiator
Set the radiator into place and secure it with the radiator retaining bolts. Attached the radiator stabilizing arm. Attached the radiator hoses to the engine. Fill the radiator with fluid.
Drain the coolant from your Ford Fiesta radiator. Remove the radiator hoses. Remove the radiator stabilizing arm. Remove the radiator retaining bolts. Reverse the process to install your new radiator.