No, it will not glue it, just dry up and become flaky. You must use a proper glue for each plastic. - Yellow glue is only for ABS.
Chlorinated Polyvinyl Chloride (CPVC) pipes can withstand heat up to 180 degrees. A special glue is used to blond it together. PPR pipes are a made of plastic and uses no glue as it is heat-fused. PPR is a commercial product.
This is quite confusing. -If you mean "plumbers glue that has been glued to the metal pipe" as opposed to "a shower that has been glued to a metal pipe" , then it's a little easier. -Any plumbers glue, be it ABS, PVC or CPVC glue, or Transition cement can be peeled off metal pipe.In future PLEASE say what exactly you mean by "metal pipe" - copper, - galvanised, or which other metal, and please -Name your glue - Most plumbers commonly use at least 4 different glues.
Only if it is wraped pipe -- And prime and wrap fittings also and install a annode making sure your annode is lower than your pipe
You should scratch the surface or use a piece of sand paper on it to break the surface coating.
I would use hot water conn. on it. Both on cold and hot
I don't understand why you'd want to do that . CPVC glue is expensive, PVC glue is cheap and glues PVC pipe better.
There is no special PVC pipe. CPVC can be used for hot water applications or in my opinion just use PEX pipe.
You can, bearing in mind that it will not stand any pressure or force separating the joint.
Mainly for making water pipe.
You can purchase PVC and CPVC piping at any local hardware or building supply store. Plumbing supply stores are less common, but you may have one near you. Be certain that you purchase the correct primer and glue for the type of pipe you intend to use, and use the correct pipe for the correct purpose.
no, use CPVC instead.
yes you use cpvc pipe
Chlorinated Polyvinyl Chloride (CPVC) pipes can withstand heat up to 180 degrees. A special glue is used to blond it together. PPR pipes are a made of plastic and uses no glue as it is heat-fused. PPR is a commercial product.
Only if it is wraped pipe -- And prime and wrap fittings also and install a annode making sure your annode is lower than your pipe
This is quite confusing. -If you mean "plumbers glue that has been glued to the metal pipe" as opposed to "a shower that has been glued to a metal pipe" , then it's a little easier. -Any plumbers glue, be it ABS, PVC or CPVC glue, or Transition cement can be peeled off metal pipe.In future PLEASE say what exactly you mean by "metal pipe" - copper, - galvanised, or which other metal, and please -Name your glue - Most plumbers commonly use at least 4 different glues.
No PVC cement can not be used on cpvc pipe. Cpvc and PVC pipe have different chemical compositions so a cement made for one will not work for the other. The process of joining plastic piping together is called solvent welding and the use of the wrong formulation will result in an inferior weld
Not unless you have a transitional fitting. The diameters of the two are not the same. I know sometimes it can feel like they fit together snugly but they will not hold the pressure.ANS 2 - AS he says above, you can glue it but it's only usable for drainage, not regular water pressure. Use Weld-On 794 to glue it