answersLogoWhite

0

Yes it should, check the output amps/watts against the amps/watts your polisher uses. presto, if they are close just start the polisher and watch the load you put upon it. If you work it too hard you will pop the circuit breaker and need to reset.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Can you use a 62 wire to run a 240volt 60 amp circuit in the USA?

no


Can you use 240volt to run a 24v 1000w machine?

Of course not. the machine would run for a tenth of a second, and quit running forever.


Is an generator an example of a fuel?

Its 'a' generator ! And no, a generator still needs fuel to run


What size of generator to run 5.5kw 400v 50Hz motor?

You need a 5.5kw generator to run a 5.5kw motor.


Can a propane generator run on natural gas?

No, a propane generator cannot run on natural gas. They are designed to run on different types of fuel and are not interchangeable.


How long will a 230volt fan motor run on 115 volts?

No long. It will burn up and hopefully trip the breaker. This would be dangerous. <<>> The fan will operate at half speed. It may run a bit hotter but no damage will be done.


How do you convert a DC motor to a generator?

all the electrical machines can be run either as a motor or as a generator. but dc machines, A motor can be run as generator and vice versa with little modification


Will a 1 kVa generator run a deep freeze?

No, the generator is too small.


How can you run a dayton 115Volt AC motor on 230Volt AC?

Use a VFD (Variable Frequency Drive) to drive the motor and do not run the motor at more than 50% of the full capacity. For higher RPM use gear system.


How many hours will a propane generator run after the power goes out?

The factors that determine how long a propane generator can run are the size of the propane tank, the size of the generator, the brand of generator, and what is being used under the generator's power.


Can a generator run an arch welder?

yes


What KVA generator is required to run two AC of 1.5 ton?

How much KVA generator is required to run two AC of 1.5 tone