0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why does the throughput drop when is load is either very low or very high?
The sent packets will increase according to the sent packets. And the relationship will become less. When it is over 1100 the number of received packets will decrease when the sent packets keep increasing.
Why Round trip time varies to same web server When you ping?
Ping usually sends small packets to the destination machine, which is in turn sent back by the destination machine to the source machine. There are usually many paths available from the source to the destination, and each time ping is run, it is not necessary that the same route is chosen. (The route can vary depending on the traffic patterns etc) This changes the amount of time taken by packets to come back to source machine when ping runs different number of times.
What is the purpose of sequence number SEQ equals in TCP data packets?
It is used to keep track of the data packets being sent to and from hosts.
Identify the ping command output that would indicate the problems are at the data-link layer of the network?
Packets: Sent = 4, Received = 2, Lost = 2 (50% loss)
What do you call data packets that are in a group and sent together?
Data packets that are in a group and sent together are called a frame. Data packets do not have to travel through unnecessary nodes so they can be sent quickly.
What is sequence number in tcp?
It is used to keep track of the data packets being sent to and from hosts.
What is the default interval for how often Hello packets are sent out and can you change the default settings?
The default interval for Hello packets to be sent out is 5 seconds. Yes, the default settings can be changed by entering "IP HELLO_INTERVAL EIGRP" on the command line.
Ping and tracecert commands use packets from which protocol?
TCP of course because both programs check integrity of sent packages and the delivery status it can be accomplished with TCP (UDP does not support such features).
What does it mean to ping a website or server?
" PING " , simply means ' Packet Internet Groper '. This is a utility that actually lets you check the speed of Packet data sent and received on a network. When an IP address is pinged, the Network Adapter send out a specific number of packets and receives it back. A calculation of the receive time is made and this is usually in milliseconds. The higher this time is the longer it has taken the packets to be received. This is not good because it means that the Network has excess packet collisions and or noise and that it is quite slow.
Which command shows the number of packets sent and received?
Show ip eigrip traffic. Use 'netstat' for this purpose.
What does the computer term packet mean?
When information is sent over a network, it is divided into relatively small pieces, which are sent one at a time. These are called "packets".When information is sent over a network, it is divided into relatively small pieces, which are sent one at a time. These are called "packets".When information is sent over a network, it is divided into relatively small pieces, which are sent one at a time. These are called "packets".When information is sent over a network, it is divided into relatively small pieces, which are sent one at a time. These are called "packets".
What is Filtering in computer networking?
Filtering is the act of deciding which data packets are allowed to be sent and which packets should not be sent.Packets that are not sent are said to be filtered.Filtering decisions can be made by any device that routes, generates, or receives packets, but generally packets are filtered by firewalls.HTH,Gdunge
