Changing head gaskets for a 2004 f350 involves many steps. Any wiring, air lines, and anything else over the valve cover will have to be removed as well as the intake. The valve cover is removed, along with the rockers and push rods. Then the head can be unbolted and the gasket replaced.
20,000 lb
No.
on the top of motor round black housing
It seems to be around 13/18 city/Hwy
How do you change the alternator on a 1996 ford F350 diesel
well from what ive heard its easier to take off the front clip to replace them. But if you blew you head gaskets your better off just pulling the engine and studding your heads so it never happens again. I assume your probably running a chip, which it takes 40 pounds of boost to blow the head gaskets in the 6.0 Powerstroke. I own an 04 also, it is SCT tuned. I had my head gaskets changed and heads studded, havent had a problem since. But its usually a job for a Diesel Mechanic.
Just got my 2004 F350 back from the shop and they had to remoce shroud for easier access
where does the oil pressure regulator on a ford f350 diesel truck
The transmission sensor is inside of the transmission under the pan. The pan has to be removed to get to the sensor.
9.8 quarts with filter change on the 7.3L Ford Diesel.
how do i down load a wiring diagram for a f350 6.0 diesel engine compartment
my 2003 f350 dually avg 13-14 combined