Loosen the 3 driveshaft bolts disconnect the rear brake cable, pull the axle nut, and then pull the axle shaft. the drive side should be removed carefully and the brake side hub both just release upon removal.
Tire pressure 1993 800 intruder suzuki
Lift the rear of the motorcycle, use a tire iron to loosen and remove lug nuts, and remove old tire. Now, put in the new tire, replace the lug nuts and tighten, lower the motorcycle to the ground.
Usually motorcycle tire pressure is 32psi, see also the recommended on the tire itself.
Use tire iron to break lugs loose. Jack up by frame to clear tire, remove lugs, exchange tire, thread lugs hand tight,lower until tire just contacts ground to keep from spinning, torque to specs, drop car.
100 90 14
130/90-17
34 in the front, 36 in the rear.
tire pressure for rear is to be 1barand on the front 1.7 bar
Solo rider front 25 rear 25 Double rider front 29 rear 33
22X11X10 Rear 22X8X10 Front
front 29 psi rear 36 psi
30 psi for both front and rear.