There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
In the fusebox. Check the one in the engine area and the one under the dash of the driver side.
Right next to the drivers side front marker light, in the headlight area.
Check the stop light fuse Check the operatin of the stop light switch usually at the upper end of the brake pedal under dash area
Hey John==The check engine light is trying to tell you that something iis wrong. Takeit to Auto zone and have the codes read anD it wiss tell you what area to check. GoodlucckJoe
Check the bulbs they are double filamented with the smaller being for the brake lights Check the fuses Check the operation and adjustment of the stop light switch - usually located at the upper end of the brake pedal under the dash area
Check the bulbs they are double filamented -smaller for brake lights larger for tailights Check the fuse Check the stop light switch usually located at the upper end of the brake pedal under dash area
Check fuse Check stop light switch - usually located at the upper end of the brake pedal under dash area
Replace the fuse with a test light Turn on running lights (test light should illuminate) Remove bulbs one at a time Check fixtures until test light goes out - this will indicate area where short is Further investigate wiring in this area
It's the icon / graphic of a an engine, upper right hand area of the instrument panel.
The Check Engine Light will come on whenever the OBD (On-Board Diagnostic) system senses any of a number of different problems with the engine operating parameters. If your car has this light on, take it to a good shop and have them read the codes that are stored by the car's computer. This will point them to the problem area.
Check bulbs, they are double filamented with the smaller being for the stop lights Check fuse Check the operation and adjustment of the stop light switch usually at the upper end of the brake pedal under dash area
THE CHECK ENGINE LIGHT IS ON FOR MANY REASONS, THE BEST THING THAT YOU CAN DO IS GO TO A PERCISION TUNE IN YOUR AREA TO HAVE THE PROBLEM FIXED.THERE ARE ABOUT 5 DIFFERENT THINGS IT COULD BE, POSSIBLY THE OXIGEN SENSOR IS BAD.THAT IS USUALY THE PROBLEM.