It might be your TPS Sensor. They are known to go out. If you turn the key off and on five times the light will go off but after another five turns it will turn back on. Any local mechanic should be able to check it with an OBDII reader.
Yes, check it on a level surface with the engine running and the gear shift selector in neutral or park. Check it after the engine has warmed up.
The check engine light is reset with a scan tool after repairing the failure. Unhooking the battery may turn it off temporarily, but it will return if not repaired.
You can't. This is an OBD2 compliant vehicle, and as such you will need a scan tool to access the codes.
The code can be cleared by unhooking the battery. The light will return if the failure is not repaired.
Engine coolant temp sensor. I would check codes if you have a ECT code replace the sensor. does the check engine light come on with key on engine off, If it doesn't replace bulb. If the engine light works check fuel preasure,
So that the oven can get warmed up and to get to the right temperature!
It is 8-10 degree before top dead center with engine warmed to operating temp., RPM's at the proper range and the check engine connector jumped at TE1 and E1.
There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.
Check engine light. It means there is a problem with the emissions system. Take it to the dealer for repair.
With an OBD2 scanner.
The check engine light would be illuminated and TPS related codes would be confirmed and/or pending.
You will have to get the engine scanned and the necessary repairs made. Then the check engine light can be cleared. Just to clear the light without the repair will result in the light comming back "on."