yes the 4.3L vortech has the same motor mounts as the 350
1979 267 / 350 engine ! Danny Coleman
Either a 200 or 231 cid V6, or a 267 or 305 V8
dont know about the emissions stuff but if your planning to swap engines the ECM will also have to be switched as the 267 ECM will not work on the 305
It should weigh somewhere around 575 pounds. Most Chevy small blocks that are all iron should be close to this, give or take a few pounds.
30% of 267= 30% * 267= 0.3 * 267= 80.1
267
44% of 267 = 44% * 267 = 0.44 * 267 = 117.48
Yes.
A 267 is 3.5" x 3.48". So, a .060" overbore would make it 3.56" x 3.48". 3.56/2=1.78*1.78*3.14159*3.48*8 cylinders=277 cid.
depends on the year, my 2000 Z71 has 285 fly horsepower and 315 fly torque i believe the hp in the 07's are up to 315 now. With an CAI and duals with an Xpipe i put 226 hp and 267 torque to the wheels
Yeah it can fit, just make sure it's from an 85 and down 350 or 305.
It is simply 267/1 as an improper fraction