It will have a 7.5 inch...but could be several different gears. Probably a 2.29 or 2.73
Either a 200 or 231 cid V6, or a 267 or 305 V8
dont know about the emissions stuff but if your planning to swap engines the ECM will also have to be switched as the 267 ECM will not work on the 305
Either a 229 cid V6, or a 267 or 305 cid V8.
yes the 4.3L vortech has the same motor mounts as the 350
Either a 200 cid V6, 231 cid V6, 267 cid V8 or a 305 cid V8.
1979 267 / 350 engine ! Danny Coleman
The address of the Silas Bronson Library is: 267 Grand St., Waterbury, 06702 1981
It should weigh somewhere around 575 pounds. Most Chevy small blocks that are all iron should be close to this, give or take a few pounds.
30% of 267= 30% * 267= 0.3 * 267= 80.1
44% of 267 = 44% * 267 = 0.44 * 267 = 117.48
267
A 267 is 3.5" x 3.48". So, a .060" overbore would make it 3.56" x 3.48". 3.56/2=1.78*1.78*3.14159*3.48*8 cylinders=277 cid.