Remove glove box 4 bolt behind it. remove right and left lower dash panels. Undo 4 clamps 2 in the back 2 under glove box wiggle to break seal. its off
The 2001 Chevy Express Van crankshaft sensor will be on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft sensor.
Refer to your owner's manual for specific instructions of the removal procedure for your Van's year. There are some typical drawings at http://astrosafari.proboards.com/index.cgi?board=interior&action=display&thread=28&page=1
It should be at the bottom front of the engine by the timing cover.
It depends on the model year and size of engine cover based on the engine underneath. For 1996 and newer, you generally have to remove the passenger seat in order to get the cover out of the way.
On top of the RH Side of the Engine. You will need to remove the engine cover from the inside of the van to get to it. Just trace the coil wire from the distributor.
The 1994 Chevy Lumina Van fuse box will be located next to the battery box. The fuse box cover should be labeled as such.
The 1997 Chevy crankshaft sensor can be found on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft sensor.
how do you remove the pince bolt cover of a 2005 Chevy express van
The 1998 Chevy Express 1500 Van could have the 4.3, 5.0 or the 5.7 engine.
engine diagram of 1995 chevy astro vas
Yes it would be easer to get at it with the dog house removed.
A 1991 Chevy Van has a 4 speed automatic transmission. The engine on the 1991 Chevy Van is a 4.3 L V6 and a 6.2 L Diesel engine is also available as an option.