Not sure what your question is. But a typical problem with these switches is that the bracket get bent. If you look under the hood behind the engine on the left side as you are sitting on the mower you will see the bracket and the switch. Make sure the bracket is straight up and down. If it is sitting at an angle it will probably not make contact correctly. You can use a prybar or something else to put some pressure on the barcket and get it back to the straight position.
The safety switch to start the motor on a Ranchking riding mower is located in the ignition. If the clutch needs to be depressed several times before the mower will start, there might be a problem with the adjustment of the clutch.
If it is an automatic it will not have a clutch safety switch it will have a neutral safety switch
Either the machine does not "know" or the clutch/brake switch is bad. Either way it is a safety switch
the clutch safety switch is located under the dashboard, on most cars, it is connected directly to the clutch pedel.
behind the clutch.....
DO YOU MEAN THE NEUTRAL SAFETY SWITCH?
on your clutch pedal
Clutch safety switch =- should be on the top of the clutch pedal under dash area Neutral safety switch could be at the lower end of the gearshift handle or at the side of the transmission
Clutch safety switches are usually mounted under the dashboard above the clutch pedal, so that they are activated when the clutch is depressed.
There isn't a neutral safety switch but a clutch switch that is located under the dash on the clutch pedal.
Clutch Safety Switch? Usually located at the upper end of the clutch pedal under dash area
The neutral safety switch or (clutch safety switch) is above the clutch pedal near the fire wall. It is a small black (on my Subaru Impreza) button that is about half way between the pedal and where the clutch arm is attached.