All ink will dry out if it goes unused for a period of time. Some printers will run a cleaning cycle ever couple of days to help prevent this but it will use up your ink each time it runs a cycle. If you use your printer infrequently then a laser printer would be a better choice. Laser printers use toner that is a dry powder and would not dry out. If you need the color or multifuntions that a laser printer wouldn't have at a reasonable price then I would look to a small hp inkjet printer that takes the 60 or 61 series. These are small ink cartridges that have the printhead embedded on the cartridge itself. This way if your ink dries out you only have to pay a small amount (relative to other ink carts) to get it going again.
Laser printers uses dry ink power
ink in the printer, does dry up if not in use for a long time.
Computer ink is the ink for your printer. When your printer is connected to your computer, it monitors how much ink you have left. All you need to is buy more.
A laser printer uses a dry toner powder in a sealed cartridge.
A computer doesn't require ink. Look at the printer, and write down the brand and type. Then go to your local computer store and buy the ink
A printer puts information that is stored on the computer as ink on paper.
When you are using a Canon ink printer, you will need files installed on your computer to enable it to recognize that equipment. If your computer is not going to work with the printer you are trying to use, then your documents are not going to get printed from that particular system.
Probably because your printer is out of ink or your printer is broken or your computer is broken an maybe your f***ed in the head
Computer printer's ink is specially formulated, and I would recommend not using a fabric ink.
The printer works by sending out words and pictures that are stored into the computer through paper and ink.
There may be multiple problems with the printer (or the ink cartridges): Does the printer have empty ink cartridges? If so, put in fresh ones. Did you refill the ink cartridges? Use remanufactured ones? If so, then they may be: overfilled, heads/contacts worn out, ink level detector not reset (on some ink cartridges), etc. Is anything (that's part of the printer or ink cartridges) broken? If so, it may be too broke to work. Are the ink cartridges expired/dry? If they are expired, some printers say they don't detect them, thus they won't print. If they are dry, then they won't print. Try doing a head cleaning. Either with the printer's software, the printer's head cleaner button, or with cotton swabs and rubbing alcohol. Did you touch the ink cartridges (where the printer's/ink cartridges instructions) said not to? If so, clean them. Are the contacts on the ink cartridges/carriages dirty? If so, clean them. Is the paper loaded/inserted? If not, load/insert the paper. Are you using the wrong size/weight/amount of the paper? If so, please use the correct size/weight/amount of the paper. Is the printer communicating with the computer? If not, plug 1 side of the USB Cable into the printer, then plug the other side into the computer. Is the printer on? If not, turn it on. If this doesn't work, plug it in. Then turn it on. Does the printer have a paper jam? If so, clear the jam. Does the printer have objects in it? If so, get the objects out. Is the printer dirty (on the inside)? If so, clean it.
For years, the engineer's ink tool has been the computer printer. Before that, it was the 'Technical Pen'.