1 cubic meter = 35.315 cubic feet. 1 cubic foot of natural gas contains 1,000 BTU energy.
1 cubic foot of propane gas contains 2,720 BTU energy.
1 BTU = .2929 Watts
To convert a cubic meter of Natural Gas to a kilowatt, use this formula
kW-hours = cu meters x 35,315 x .2929 x efficiency% x run-time%
And to convert a cubic meter of Propane gas to a kilowatt, use this formula
kW-hours = cu meters x 95,351 x .2929 x efficiency% x run-time%
The efficiency is the AFUE efficiency of the furnace (typically, 75% for an old-fashioned conventional furnace, about 80% for a mid-efficiency, and around 92-97% for a high-efficiency furnace.
If the furnace is running 60 minutes out of the hour, then the run-time% is 100%. If the furnace runs less, you must reduce the kW figure by the same amount. For example, if the furnace runs for 30 minutes out of the hour, enter 50% as your run-time%.
The HVAC Veteran
About .58 t
Multiply the gas units (imperial) by 100, then divide by three. This will give you how many kilo watts an hour. If you want a more accurate answers, multiply the gas units by 31.6. For metric metres (cubic meteres) multiply by 11.06 to get KWH
It set for LP gas need to convert to natural gas
Yes it can convert into gas,bcoz it reqired high temperatue to convert liquid nitrogen to gas.
Yes, an M3 gas meter is commonly used in metric countries. It is a unit of measurement for gas volume and represents one cubic meter of gas.
i have a raburn gas cooker can i convert it from town gas to lpg
Litres
It would be very difficult to convert a solid heater into a gas.
You look up the density of natural gas, make sure it is expressed as kilograms (or tons) per cubic meter, convert it to those units if it isn't, and then multiply the volume by the density.
gas
I am wondering if you can convert the lp or propane gas to natural gas on a bosch tankless hotwater heater. I am guessing it has a different orfice and regulator
Heat it.