Euroclad positions copper cladding as a life-cycle decision rather than a short-term solution.
Mostly. The core is 100% copper and the outer cladding is 75% copper + 25% nickel. Taken together that makes the coin about 83% copper overall.
Nickel-colored, which is a dull silvery color. The cladding is made of nickel and copper.
Since 1965 US dimes have contained a small amount of nickel in their outer cladding, amounting to 8.33% by weight. The rest of the cladding an the coin's core are copper. Up to 1964 US dimes were 90% silver and 10% copper.
poo does!
They're the same, actually. Copper-clad pots are always made out of stainless steel, so the pots are identical. The trick is that a copper-clad stainless pot absorbs heat better due to the copper cladding - the copper conducts heat better than stainless.
Most likely it has been exposed to heat or a chemical that discolored the cupro-nickel cladding. If it's taken on a gold tone that would make the copper edge seem to blend in with the outer cladding. Unfortunately as such it's a damaged coin and has no extra value.
This is a common error called a lamination error. It occurs when part of the copper-nickel outer cladding doesn't stay bonded to the inner copper core. Lamination errors on state quarters retail in the $10 range.
1964 - 90% silver, 10% copper 1965-69 - 40% silver, 60% copper 1971-present - 75% copper/25% nickel alloy cladding on a pure copper core.
The US Gold Dollar was minted from 1849 to 1889. No US Gold Dollars have been issued since 1889. From 1849 to 1854 the head on the coin represented Liberty. From 1855 to 1889, the head on the coin was a representation of an Native American (then called an Indian). US Dollar coins currently in circulation are neither gold nor silver, but a variety of alloys, some of which look like gold. They include coins representing: * Susan B. Anthony (minted 1979-1981,1999) in a copper-nickel alloy, * Sacagawea (minted 2000-present) in copper with manganese brass cladding, * deceased Presidents of the United States (2007-present) in copper with manganese brass cladding, * Sacagawea , Native American Series, (minted January 2009-present), in copper with manganese brass cladding.
It sounds like you have what's called a lamination error. That can happen in a couple of ways, but is most likely caused when a coin blank is punched from the end of a roll of metal stock where part of the cladding was missing. That means one (or sometimes both) sides of the inner copper core are visible. Lamination errors can bring several dollars from a collector, depending on the coin's quality. Also remember that the outer cladding is copper-nickel, not silver. Silver hasn't been used in circulating dimes since 1964.
If the cladding has come off and the coin is thinner than a normal quarter, it's called a lamination error. That happens when the bond between the copper core and the cupronickel cladding fails. This error can retail for $10-12. However if the coin is the same thickness as a regular quarter it's NOT a lamination error because it still has full cladding. The color change is the result of being plated with some other metal for use in jewelry, or exposure to heat/chemicals. In this case it's considered to be an altered coin and has no extra value.
Starting in 1965 US dimes and quarters are made in copper-nickel composition bonded to a core of pure copper, and are referred to as clad coinage. Half dollars and dollars were switched to the same composition in 1971; starting in 2000 dollars have been struck using an outer cladding of gold-colored brass instead of copper-nickel.