0
Could a bad brake light switch cause cruise control to not work?
Wiki User
∙ 10y ago
yes
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Does brake switch control cruise control?
On most vehicle the brake switch is one way to shut the cruise off.
What is a speed control deactivation switch?
It's near the brake pedal or brake light switch.... It deactivates cruise control
What is the small silver switch for located in front of your left shin above the brake peddle in a 1989 MGM?
There are two. The brake light switch and the cruise control cut off switch. You are probably talking about the cruise control cut off switch. When you depress the brake pedal, the brake lights come on and the cruise control stops. Hope this helps
Where is the cruise control switch located for the Lincoln town car 93?
The cruise control switch on a 1993 Lincoln Town car is attached to the master brake cylinder under the hood. Ford had a recall on this car because the cruise control switch could lead to a fire.
Where is the cruise control brake pedal switch on a 2002 Mercury villager?
On the brake pedal.
How do you check the brake light switch on a 1994 Camry with cruise control?
Common issue...if the brake light swith is not working; the cruise control will not engage and your brake lights will not go on. replacing switch is easy and inexpensive...its located in the upper part of the brake pedal.
Why did your Chrysler town country cruise control stop working?
There is a switch that turns on the cruise control there could be a problem with that. There could also be a problem with the transmission linkage also. Causes include check engine light, vacuum hose, clock spring, brake light switch,
Why two brake light switches in a 1988 240 Volvo?
One for brake lights, one for cruise control. If you hit the brakes when using cruise control, that second switch is what tells the control modules that the brake is being depressed.
Where is the brake light switch on a 2000 Cadillac Catera?
at the top behind brake pedal, don't remove the lower switch it for the cruise control
How do you install a brake light switch with cruise in a 1990 Jeep Cherokee?
Start by removing the connections for the cruise control and brake lights, then remove the bolt that holds the switch to the brake pedal. Once the brake pedal is loose the switch is held on the brake pushrod by a bushing with nylon retaining washers. Carefully remove one washer and slide the bushing out, the switch can now be removed from the pushrod. Installation is the reverse; line up the hole on the switch with the hole on the pushrod, make sure the tabs for the cruise control and brake lights are facing properly. Reinstall the bushing and replace the other nylon washer, replace the bolt and tighten. Lastly connect the brake lights and cruise control.
Could a faulty brake light switch cause the cruise control to disengage while driving and also cause the engine to surge and cause the truck to act as if it has transmission problems?
yes.tcc will not work corect or cruise control
What is the name of the sensor that is connected to the brake pressure control valve in a 1993 Lincoln Mark VIII it is leaking brake fluid?
cruise control switch
