Fire Hydrant maintenance/removal is normally the responsibility of the City or the works/utilities department, as it is a part of the municipal water system. Firefighters are generally not involved with anything past the normal operation of a fire hydrant.
If you park next to a fire hydrant you are blocking firefighters' access to it, so they will be less able to fight a fire if one occurs.
A hydrant is a type of water pipe that sits straight up for a fire hose to be attached to. One example sentence is, "The firefighters attached their hose to the fire hydrant near the store to put out the fire in the building next to it."
they use a special large wrench tool to open it then connect the hose, that's what is on the side of the hydrant if you look closely!
A fire hydrant comes in use when there is a fire by a house, building of anywhere close by. Firefighters will attach the hose to the hydrant to spray the water in the fire. ( I mean, have you ever heard of dragging tons of water around town all day??) I hope this answers your question!
no hydrant
A fire hydrant is normally pressure regulated to 7.0barg which will be reduced to around 3.5barg at the nozzle end.
Because its the only type of hydrant there is
Considering that Wisconsin is 320 miles at its maximum, that would be the furthest you could park away from a fire hydrant in Wisconsin and still be in the state.
The opposite of hydrant (water-releasing structure) could be: -- drain (where water goes, i.e. back out) -- inlet (where water enters the system, as opposed to where it exits)
Because its the only type of hydrant there is
Re is a prefix for hydrate
The distance is related to the length of a fire hose and the travel path of the tender from the hydrant to the point of fire attack. This could vary but be a normal max of 93m.