0
What else can I help you with?
Do you need to use sealant plus gasket when attaching fuel pump to Chevrolet 350 engine block?
If both surfaces are clean and flat and you are using a new gasket, no sealant is necessary.
How hard is it to change a 1991 ford escort lx thermostat?
locate the upper radiator hose. follow it from the top right side of the radiator to the engine block. remove the hose from that block , then remove three screws so that little block can be removed where you'll find the thermostat inside. clean the old gasket off both sides of the thermostat housing, replace the thermostat and gasket... dont forget to use a sealant around the edges of the block and the thermostat housing before securing
Does AutoZone sell engine block sealant?
Shop for BlueDevil/16 oz. pour-n-go head gasket sealant 00209 with confidence at AutoZone.com.
Can you get oil in your coolant system?
Yes you can. You could have a cracked head or engine block. In some cases the head gasket or intake gasket could be defective. Also check to see if your transmission fluid is low as the fluid passes through the radiator for cooling. If the cooling tank is cracked then it can enter the radiator.
Why do I have Oil in the radiator 1995 grand marquis?
there could be a leak in the oil cooler or maybe a head gasket or a cracked block. Is there every any water in the oil?
Oil water is mixing but its not the head radiator or gasket?
You may have a cracked block on an inner wall.
What causes oil in the radiator?
hi, blown head gasket, cracked head or block or automatic transmission oil cooler in radiator leaking
What do you do when you find oil residue in the radiator of your '85 Ford Ranger?
what do you mean what to do? do you want to have an idea of what it could be? it could be the transmition fluid cooling lines(tank) that sometimes are located inside your radiator. if the lines leak you will find "oil" in your radiator. if that is not your problem then either a head gasket or a crack engine block.
How did oil get in my radiator?
You probably have a cracked head gasket, and the oil mixed with the water that circulates through the block and got into your radiator.Or if the car ran hot and you have aluminun heads, you could have warped the head causing the water and oil to mix. Or your block could be cracked.
What is causing your 1990 Honda Civic to still overheat after replacing radiator water pump head gasket radiator cap and thermostast?
AnswerWhen you replaced the headgasket, did you have the head checked? It could be warped, causing the gasket to fail, or worse it could be cracked. I've also seen the water jackets within the block crack if it overheated to many times.
Where do i place Sealent for heads on small block Chevy?
Do not use sealant on the head gasket. I use permatex on the threads of the bolts that go into water jackets.
How do you replace oil pan gasket on 94 ford ranger?
There is not gasket between the engine block and the oil pan. A sealant was used to join the two. If you are leaking oil from the pan you might try checking the bolts and making sure they are snug. If they are snug and it still leaks get tube of gasket maker to reseal it. Be sure to get all the old sealant off the pan and the block before you reapply. If the pan is leaking, you MUST remove the pan and install a gasket. Usually cork. I know of no mechanic that has had luck just using the sealant that a manufacturer uses. That is why Oil Pan gaskets are available for just about any car out there.
