0
Yes,when the neutral potential is at ground potential i.e., 0v.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is line voltage in star connection?
Phase to phase voltage is 1.732 (the square root of 3) times the phase to star point (neutral) line voltage.e.g. if the line voltage is 220Vphase voltage = 1.732x220 = 380V (approx)Additional AnswerYou might also like to know that the line voltage leads the phase voltage by 30 electrical degrees. And, incidentally, the correct expressions are 'line-to-line' not 'phase-to-phase', and 'line-to-neutral' not 'phase-to-neutral' (think about it, a line voltage is measured from the junctions between adjacent phases, so they cannot be 'phase to phase'!)
How do you get 277 volts from a 480 volt line?
All three phase four wire systems have the ability to produce a voltage to ground or neutral. Take any phase voltage be it primary or secondary and divide it by the sq. root of 3 which equals (1.73) and you will obtain the phase to ground or neutral voltage. The ground and neutral should be of the same potential and when talking about electrical installations these two words get interchanged quite often. Some three phase secondary voltages are 208, 480 and 600 volts. Electricians will talk about voltages of 120/208, 277/480 and 347/600. The first number is the phase to neutral voltage and the second number is the phase to phase voltage.
In a 3 phase 480 panel what voltage should you get phase to phase?
The voltage you are referring to is a 'line-to-line' voltage ('line voltage'), as there is no such thing as a 'phase-to-phase' voltage.480 volts. In real life, the voltage will vary slightly by up to 3% (14 V) on a properly sized circuit. Line to neutral will measure 277 volts, plus or minus 3%.
Can the star point of a 400 volt three phase generator be grounded to produce 240 volts?
A 400/230-V three-phase generator hase three line terminals, together with a neutral terminal. The line voltage (i.e. the voltage between any pair of line terminals) is 400 V, while the phase voltage (i.e. the voltage between any line terminal and the neutral terminal) is 230 V.
What happens if neutral of three phase four wire system is break?
For a balanced three-phase load, the neutral current is zero, so the loss of the neutral would have no effect.However, for an unbalanced load, the 'difference' between the line currents results in a neutral current.So, for an unbalanced load, if no neutral current can flow, then the load's neutral point will no longer remain symmetrical, and the line voltages will become unbalanced. If the unbalance is severe, then individual loads may be subject to over-voltages or under-voltages.
What is line voltage in star connection?
Phase to phase voltage is 1.732 (the square root of 3) times the phase to star point (neutral) line voltage.e.g. if the line voltage is 220Vphase voltage = 1.732x220 = 380V (approx)Additional AnswerYou might also like to know that the line voltage leads the phase voltage by 30 electrical degrees. And, incidentally, the correct expressions are 'line-to-line' not 'phase-to-phase', and 'line-to-neutral' not 'phase-to-neutral' (think about it, a line voltage is measured from the junctions between adjacent phases, so they cannot be 'phase to phase'!)
230V line to line a single phase?
Yes. 230V line to line is considered single phase power. The 115v half part of that is called split phase. It should not be called two phase, as it is one phase that has been center tapped and grounded at the neutral point - it is still one phase power.Answer230 V is the standard nominal voltage for residences in Europe. 230 V is the line-to-neutral voltage (phase voltage). Low-voltage distribution is by three-phase, four-wire, system with a nominal line voltage of 400 V and a nominal phase voltage of 230 V.
Should there be power from common to ground in wall socket?
120 volt wall outlets. Their could me a small voltage between neutral and ground,up to around 1.5 volts. What you are measuring is the voltage drop on the system at that point in the system. You see the neutral and the ground are at the same level some where up stream (service panel). The neutral is under the same load as the phase conductor, and the neutral will drop voltage same as the phase. This is in fact the way I measure voltage drop, (neutral to ground.) However don't get fooled by high imped. meter, They have a way of ghosting a voltage. Or floating high, You get a reading but the voltage is really not their.
How is the neutral point in a star connection created?
In a distribution transformer's star-connected secondary, the common point of connection is called the 'star point' and is connected to earth. The star point then provides the neutral connection for the transformer secondary, providing a return path for any unbalanced currents due to an unbalanced three-phase load.This arrangement provides a four-wire distribution system, comprising three line conductors and one neutral conductor (in addition, there are various methods of providing an earth connection to consumers). The line-to-line voltage is called a line voltage (in the UK, 400 V), while a line-to-neutral voltage is called a phase voltage (in the UK, 230 V). The line voltage being 1.732 x phase voltage.
Why is it stated - 3 phase 440 VAC when one phase voltage is 220 VAC?
In three-phase there are three live wires and a neutral. The voltage of a three-phase system is always quoted as the live-to-live voltage, and the voltage from one live wire to neutral is 57.7% of that. A 440 v 3-ph system has 254 volts between live and neutral. <<>> The question statement is not correct. Two legs from a three phase three wire 440 volt system will still be 440 but classed a single phase. On a three phase four wire system supply, the voltages will be determined by the following equation. 440/(square root of 3) 1.73 = 254 volts. The second single phase voltage attainable from this source connection is any one of the three phase legs to grounded neutral center point. This is known as a wye or star point connected voltage supply. To obtain a 220 volt single phase voltage, the three phase system would have to have a voltage of 220 x 1.73 = 380 volts.
How do you get 277 volts from a 480 volt line?
All three phase four wire systems have the ability to produce a voltage to ground or neutral. Take any phase voltage be it primary or secondary and divide it by the sq. root of 3 which equals (1.73) and you will obtain the phase to ground or neutral voltage. The ground and neutral should be of the same potential and when talking about electrical installations these two words get interchanged quite often. Some three phase secondary voltages are 208, 480 and 600 volts. Electricians will talk about voltages of 120/208, 277/480 and 347/600. The first number is the phase to neutral voltage and the second number is the phase to phase voltage.
In a 3 phase 480 panel what voltage should you get phase to phase?
The voltage you are referring to is a 'line-to-line' voltage ('line voltage'), as there is no such thing as a 'phase-to-phase' voltage.480 volts. In real life, the voltage will vary slightly by up to 3% (14 V) on a properly sized circuit. Line to neutral will measure 277 volts, plus or minus 3%.
What is a single circuit?
is the measured voltage,generated between a line voltage and the starting point of a three phase transformer, which is the neutral point. Answer: it is an ac circuit in which the supply has a live and neutral wire, usually at one of the standard voltages 110/120v or 220/240 v. A three-phase circuit is a combination of three single-phase circuits with the phases of the voltages 120 degrees apart so that they peak in a regular sequence.
Why is an insulated ground wire used in a 3 phase 4 wire system?
A three-phase 4-wire system has three live wires and a neutral, which is earthed at at least one point at the transformer. All current-carrying wires are insulated in this system, for safety. The voltage on the neutral might be zero or only a volt or two, but under fault conditions its voltage could be much higher.
Can the star point of a 400 volt three phase generator be grounded to produce 240 volts?
A 400/230-V three-phase generator hase three line terminals, together with a neutral terminal. The line voltage (i.e. the voltage between any pair of line terminals) is 400 V, while the phase voltage (i.e. the voltage between any line terminal and the neutral terminal) is 230 V.
How do I test my house's earthing?
Take 240V Lamp first check the voltage at Phase w.r.t neutral if lamp glows it means present voltage is OK now check the voltage w.r.t earth i.e. between phase & Earth point then lamp will glow. Now check between Neutral & Earthing Lamp should not glow. If these conditions are fulfill then your Earthing is OK.
How can I wire a 240 V single-phase outlet from a commercal building with 3-phase service 4- wire?
A three phase four wire commercial distribution service will not give you 240 volts. The nearest voltage you can get is 208 volts. It is a wye connection which gives you 208 volts between the three legs and 120 volt between any of the three legs and ground. This ground point is the systems neutral point.
