I have a 1995 VW Golf diesel and I am in the process of changing the cruise control computer a second time. The computers are known to fail, I would check it first. it is mounted behind the headlight switch (silver box).
My 1994 ed xr8 was fitted with cruise control from the factory.
Common issue...if the brake light swith is not working; the cruise control will not engage and your brake lights will not go on. replacing switch is easy and inexpensive...its located in the upper part of the brake pedal.
The cruise control relay on a 1994 F150 is operated by a switch behind the horn pad and airbag on the steering wheel. The switch will probably need replacement if the cruise control in your vehicle is malfunctioning.
No.
First you need to troubleshoot the 1994 LeSabre cruise control. Check the fuse, the cruise switch, the linkage, to find where the problem is. Check the vacuum lines on the engine as a vacuum leak can cause the cruise to not work properly.
Diagrams help a person make the appropriate changes to a car. The 1994 Nissan Pathfinder cruise control diagram can be found in its maintenance manual book.
There is no fuse for the cruise control on a 1994 Acura Integra. It is a relay switch under the hood near the battery. This would have nothing to do with the dashboard clock, if the cruise control is not working properly. If the cruise control is not coming on, check the relay, then check the carburetor or EFI (Electronic Fuel Injector). Also, the cruise control will not come on if the brake light switch or the clutch is not working properly.
Fuse for cruise control on a 1994 Acura Integra is found in the engine bay fuse box. The fuse is located in the slot labeled CRUISE.
Answerit is a automatic transmission?
there are a number of sensors that may be the problem, I recommend getting a manual (such as a Haynes manual) to check these, I had a problem where my clutch pedal spring wore out and did not fully return to engage the sensor.
check to see if your spoiler brake light is out replace it and it usually will finish the ground to the abs sensor and cruise control
check for vacuum leak.