check fuses with test light under dash
It could mean: 1. Ignition is off / engine is stopped 2. Fuse of dashboard is damaged 3. Problems with wire
Faulty wiring, faulty CECU.
they dont work
Probably a fuse or a loose cable. Try that first.
it could have to do with the preasure systems. or your gears may be grinding. go to your machanic and check it out :p
A cracked wire or worn insulation may cause intermittent stoppages.
The issue with your dashboard gauges not working could be due to a faulty fuse, a disconnected or damaged wiring connection, a defective instrument cluster, or a malfunctioning sensor. It is best to have a professional mechanic diagnose and troubleshoot the problem to determine the exact cause and solution.
Just pull one fuse out at a time and see if its burnt. Walmart sells a little fuse kit with a fuse light tester for a couple of bucks where you dont have to take fuses out to check them.
You probably have a short in your abs system which has blown your fuse try pulling the fuse. This happened in my 2000 sunfire and I pulled the fuse and all the gauges work now.
Its the fuse and if not its the fuse Boxs. by the cluch or brake peddle.
it;s called a rally k circuit expensive part and you have to remove the dash to get to it when i had mine estimated it ran about 500.00 but that was 8 years ago
There is a fuse for the gauges, check it.