Look for the meaning of one lay length of a mooring hawser
Layoffs not Lay offs
Yes you can. You need to talk to your piercer while they look at what you have and lay out what you want.
Engineering is the strongest industry in Leicester. They manufacture machine tools and control systems (Jones & Shipman), foundry equipment (Richards Engineering), materials handling equipment (Transmon Engineering), suspension components for rail, marine, and industrial applications (Trelleborg). Other is food production (crisps: Frito-Lay).
Design of plant layout involves decision of placement of various equipments and facilities in a manufacturing plant. The design attempts to achieve an optimum balance between several objectives which may often be conflicting with each other. The objectives to be optimized in designing a plant lay out include the following.Provide enough space for the various equipments, facilities and activities carried out in the plant. The facilities include the facility for storage and movement of raw material, work in progress and finished goods required or produced in the plant. The activities carried out in the plant include the manufacturing operations as well as maintenance activities.Facilitate smooth movement of material during manufacturing process.Reduce the material handling cost.Provide good and safe working environment for the people working in the plant.Reduce the total space requirement.Reduce the cost of facilities to be constructed or fabricated.
Lay a long length of rope on the ground, straight out. Grab one end and jerk it upward and downward. A wave will pass down towards the other end of the rope, this is a transverse wave.
Lay a long length of rope on the ground, straight out. Grab one end and jerk it upward and downward. A wave will pass down towards the other end of the rope, this is a transverse wave.
Lay a long length of rope on the ground, straight out. Grab one end and jerk it upward and downward. A wave will pass down towards the other end of the rope, this is a transverse wave.
Lang's lay
a rope consisting of three wire strands and three fibre strands layed right handded around a fibre core
"Pushing rope" means attempting an action that is ultimately futile. For a demo, lay a length of rope on the floor, stand at one end, and attempt to push it away from yourself. This phrase is commonly used to denote a man's lack of sexual prowess, for reasons that should now be obvious.
This depends upon the type of rope, it may be of three types - a neutral lay, right hand lay, and left hand lay. This describes how the rope is built up from its smaller parts. For a neutral lay rope, which is common for many braided ropes, you can coil the rope without any special technique and it will coil properly. Stranded ropes, where you can see the diagonal lines, called contlines, along the rope require a technique or they will kink. As you create the coil lopps, whether on your arm or on a post, you must alternate every other loop with a twist. That is, make one clean loop, and the next loop requires you to put a twist to right or left, depending on the rope lay, as you place the 2nd loop. This is continued until the rope is fully coiled.
There are multiple ways this sentence could be corrected to. Two that I could think of are--"Since this morning, the rope lie near the gate.""The rope lie near the gate since morning."has lay should be 'lie', because lay's past tense is 'lie'.
the lay ratio is the ratio between the lay length of the cabble and the Outer diameter af the cable( or the layer) lay ratio = lay length / OD and the lay ratio standard from ISO
To lay back.
I believe this is a defect in the rope cable. A "birdcage" refers to the separation in the rope wraps caused when a cable is stressed. When the separation is such that you can see a gap between one lay of rope and the rest of the cable, the defect is called a birdcage.
Its shadow will be 50 millimeters in length, if you lay it down on a flat surface.