My 2000 has 2.5 at the turbo and 3.5 at the rear.
The exhaust back pressure sensor on a 2006 6.0 diesel Ford F3 50 can be located near the exhaust manifold. The sensor is a probe that can be removed by loosening the nut.
A Ford diesel diagnostic code P0470 means there is an exhaust pressure sensor malfunction. This may be caused by faulty exhaust back pressure sensor, or pressure sensor is open or shorted.
it hooks up to the exhaust manifold and runs down the exhaust pipe
Gasoline or diesel engines are compatible with Banks Power exhaust systems, depending on the type of exhaust system purchased. Most of their products are for Jeep, Ford and Dodge diesel engines.
3.5 inch from factory
I would say a Borla exhaust system 2and5/8 inch in diameter to be exact.
The crossover pipes on a 7.3 ford diesel engine are the pipes connecting the exhaust manifolds to the turbo compressor inlet.
If you call any Automotive Parts Store they will supply you that information...
2 1/4 at tailpipe
EGR stands for "Exhaust Gas Recirculation". the 7.3 is a Diesel engine not a Gas engine. Diesel engines are not equipped with an EGR.
driver side on front of head, just follow the tube from the exhaust manifold on the drivers side and its there.
white smoke from diesel exhaust generally means you have engine coolant leaking internally in enginevery rarely , white smoke can indicate a problem with the turbo